卵石
发表于 2025-3-30 11:48:21
Investigation on failure mechanisms of composite structures subjected to 3D state of stresses,the proposed mesoscopic 3D failure criterion. In each case, advanced measurement techniques was used (such as 3D Digital Image Correlation) in addition to standard investigation (strain gauge, LVDT measurements and micrographic analysis) in order to capture the different damage and failure mechanism
ARK
发表于 2025-3-30 14:00:23
Finite Element Model Matching Based on Optical Measurement Fields on Single Shear Lap Joint,al/metal lap joints, with one fastener (LGPL type). We describe the matching process. Finally, a parametric study is presented to show the effect of fastener preload clamping and fit clearance between plate hole and shank fastener on the secondary bending.
kidney
发表于 2025-3-30 16:56:45
Interaction between a dynamically growing crack with stiff and compliant inclusions using DIC and hracture parameters are extracted. Different crack propagation patterns in terms of crack speed, crack path and stress intensity factor histories are observed followed by a macroscopic examination of fractured surfaces.
Creatinine-Test
发表于 2025-3-30 23:01:36
Electron Micrographic Digital Image Correlation: Method Optimization and Microstructural banding Cacase study on segregation-induced microstructural banding in steel, in which the influence of the banded phase and its morphology is probed by comparing the mechanical behavior of two carefully chosen, extreme cases of banded microstructures: a microstructure containing a continuous, hard band (the
essential-fats
发表于 2025-3-31 01:06:01
An Integrated Tool for Estimation of Material Model Parameters,analysis, and for specifying sample grain boundaries needed for developing the FEM model. Data analysis includes data averaging to reduce measurement noise, and filtering to correct for rigid body translations and rotations. The inverse analysis module runs the FEM model under experimental loading c
Regurgitation
发表于 2025-3-31 05:50:45
Extended DIC to Measure Stress Intensity Factors from AFM-images,heir mechanical relevance to the problem at play (e.g., rigid body motion, plane stress mode I displacement field, out-of plane singular field) or to compensate for AFM artifacts. The resulting novel DIC algorithm provides directly an evaluation of the stress intensity factor, ., without any further
HPA533
发表于 2025-3-31 09:32:14
http://reply.papertrans.cn/16/1592/159124/159124_57.png
罗盘
发表于 2025-3-31 16:37:24
Comparison of Dynamic Mechanical Testing and MR Elastography of Biomaterials,ct mechanical test. These results in gelatin are consistent with reports in agar from other groups . Differences may be due to non-idealities inherent in loading of soft, wet, material (in mechanical testing), boundary effects (in MRE), or differences in strain amplitude and strain rate.
绝种
发表于 2025-3-31 20:03:29
Back-directional Gated Spectroscopic Imaging for Nanoscale Deformation Analysis in Bone,in the transverse orientation, and this field disappears upon unloading. We conducted simple pilot simulations of optical waves in one-dimensional layered media to gain an understanding of the potential mechanisms about the spectral dependence on nanostructure alterations. Our results imply that the
mortuary
发表于 2025-4-1 01:28:16
Application of Imaging Techniques to Mechanics of Materials and Structures, Volume 4Proceedings of the 2