服从
发表于 2025-3-28 17:29:40
https://doi.org/10.1007/978-1-4615-0753-6al/metal lap joints, with one fastener (LGPL type). We describe the matching process. Finally, a parametric study is presented to show the effect of fastener preload clamping and fit clearance between plate hole and shank fastener on the secondary bending.
Omniscient
发表于 2025-3-28 22:35:45
http://reply.papertrans.cn/16/1592/159124/159124_42.png
backdrop
发表于 2025-3-28 23:25:57
http://reply.papertrans.cn/16/1592/159124/159124_43.png
absolve
发表于 2025-3-29 04:40:39
http://reply.papertrans.cn/16/1592/159124/159124_44.png
惰性气体
发表于 2025-3-29 08:11:16
http://reply.papertrans.cn/16/1592/159124/159124_45.png
手铐
发表于 2025-3-29 12:28:49
http://reply.papertrans.cn/16/1592/159124/159124_46.png
疯狂
发表于 2025-3-29 15:56:16
Neelesh Ranjan Srivastava,Vikas Mittalct mechanical test. These results in gelatin are consistent with reports in agar from other groups . Differences may be due to non-idealities inherent in loading of soft, wet, material (in mechanical testing), boundary effects (in MRE), or differences in strain amplitude and strain rate.
facilitate
发表于 2025-3-29 21:58:22
http://reply.papertrans.cn/16/1592/159124/159124_48.png
conjunctivitis
发表于 2025-3-30 01:22:52
Identification of Cohesive-Zone Laws from Crack-tip Deformation Fields,zing. The results demonstrated that the inverse analysis framework provided a systematic and rigorous method to obtain cohesive-zone laws from experimental measurements, so that more realistic cohesive zone modeling can be achieved to predict fracture processes in various engineering materials and i
Entirety
发表于 2025-3-30 07:58:18
Low Strain Rate Measurements on Explosives Using DIC,sson’s ratio, strain derived from axial-torsion loading, and tensile creep. For each measurement type we provide some details on the additional hardware required and on the requisite modifications to our existing equipment. Also, in each case we will assess the effectiveness of our approach and, whe