忧伤 发表于 2025-3-27 00:39:48

http://reply.papertrans.cn/16/1592/159113/159113_31.png

nonradioactive 发表于 2025-3-27 03:41:19

burg, West Ger­ many, June 20-24, 1983. It was attended by more than 250 participants from different countries which include Austria, Canada, Czechoslovakia, Democratic Republic of Germany, Denmark, Federal Republic of Germany, Finland, France, Greece, Hungary, Israel, Italy, Japan, Netherlands, Nor

Conscientious 发表于 2025-3-27 06:10:26

http://reply.papertrans.cn/16/1592/159113/159113_33.png

多产鱼 发表于 2025-3-27 12:59:17

Conditions for Hydrostatic Rupture in the Vicinity of Cracks or Notchesrength calculated is much smaller than Orowan’s estimate for uniaxial stress. The maximum hydrostatic stresses within a plastic zone in front of cracks in high-strength steel may reach values of about one third of the critical stress causing instantaneous rupture.

阉割 发表于 2025-3-27 17:33:38

Agent Knowledge and Beliefs in a Cloud, a simply supported beam loaded by a uniform stress on its upper side is used as an example. The critical value of the applied stress along with the position and direction of the initiated crack are determined by performing an elastic and elastic-plastic analysis of the beam.

捕鲸鱼叉 发表于 2025-3-27 20:49:09

http://reply.papertrans.cn/16/1592/159113/159113_36.png

osculate 发表于 2025-3-28 00:02:57

http://reply.papertrans.cn/16/1592/159113/159113_37.png

ROOF 发表于 2025-3-28 04:46:40

http://reply.papertrans.cn/16/1592/159113/159113_38.png

cringe 发表于 2025-3-28 08:00:49

Numerical Analysis in Fracture Mechanicsand dynamic fracture mechanics, are reviewed. Primary emphasis is placed on the finite element methods for determining two- and three-dimensional (2-D and 3-D) stress intensity factors in linear elastic fracture mechanics. Crack opening displacements (COD) and J-integrals for 2-D, stable crack growt

全能 发表于 2025-3-28 11:16:35

http://reply.papertrans.cn/16/1592/159113/159113_40.png
页: 1 2 3 [4] 5 6
查看完整版本: Titlebook: Application of Fracture Mechanics to Materials and Structures; Proceedings of the I G. C. Sih,E. Sommer,W. Dahl Conference proceedings 1984