enumaerate 发表于 2025-3-23 10:23:34

https://doi.org/10.1007/3-7908-1637-Xeen miniaturized. However, many types of systems may be miniaturized. In particular, mechanical systems can be miniaturized as well. These miniature devices can be called micromachines, and fabricating micromachines can be called micromachining.

FLAG 发表于 2025-3-23 17:50:43

http://reply.papertrans.cn/16/1556/155504/155504_12.png

我不怕牺牲 发表于 2025-3-23 19:29:46

http://reply.papertrans.cn/16/1556/155504/155504_13.png

Postulate 发表于 2025-3-23 22:22:55

https://doi.org/10.1007/3-7908-1637-X when deposition occurred. The result of any processing step therefore depends heavily on the preceding steps. Managing topography is an important part of the design process. Generally, design faults relating to topography can be classified into three categories: interference faults, structural faul

编辑才信任 发表于 2025-3-24 03:37:11

http://reply.papertrans.cn/16/1556/155504/155504_15.png

混合 发表于 2025-3-24 09:19:36

Die Zukunft des deutschen Kabelfernsehnetzes. Unfortunately, these techniques either do not work well in the microscale (section 4.1), or are difficult to manufacture. In particular, difficulties with large friction forces (section 4.4) and adhesion (section 4.3.5) fundamentally changes the design problem. This leads to alternate technique

CRUMB 发表于 2025-3-24 13:41:29

Die Zukunft des deutschen Kabelfernsehnetzese electrodes, various types of actuators are possible. However, whatever the electrode arrangement, if there exists mutual capacitance, there will also be an attractive force when a voltage is applied between the electrodes. This force will nearly always be attractive..

NORM 发表于 2025-3-24 18:43:31

http://reply.papertrans.cn/16/1556/155504/155504_18.png

Mutter 发表于 2025-3-24 20:23:15

Die Zukunft des rheinischen Kapitalismuscation. Even a very small chip will be several millimetres on a side. However, the total height of the thin-films will typically be measured in microns. Thus, surface-micromachined devices are quite constrained in this one direction.. This small vertical range can be a disadvantage.

Acupressure 发表于 2025-3-25 01:53:15

http://reply.papertrans.cn/16/1556/155504/155504_20.png
页: 1 [2] 3 4 5 6
查看完整版本: Titlebook: An Introduction to Surface-Micromachining; Robert W. Johnstone,M. Parameswaran Book 2004 Springer Science+Business Media New York 2004 LIG