希望
发表于 2025-3-30 09:52:08
http://reply.papertrans.cn/16/1541/154084/154084_51.png
paltry
发表于 2025-3-30 13:22:39
http://reply.papertrans.cn/16/1541/154084/154084_52.png
Dappled
发表于 2025-3-30 17:31:05
http://reply.papertrans.cn/16/1541/154084/154084_53.png
painkillers
发表于 2025-3-30 20:43:39
http://reply.papertrans.cn/16/1541/154084/154084_54.png
演绎
发表于 2025-3-31 01:27:36
3 Diamagnetic susceptibility of AlH4NO8S2,gy. It got even larger attention when it was reported that sub 10 nm features on a Si stamp could be replicated into a resist layer, which in turn had a profile allowing a lift-off process to be possible..,. More reports about NIL technology followed and soon also devices were reported made with NIL
Obsessed
发表于 2025-3-31 05:17:56
2 Diamagnetic susceptibility of AlF3, the semiconductor industry has relied on optical lithography and new generations of optical steppers are being developed for shorter wavelengths. Anyhow, in order to produce sub-50 nm lithography researches have started to look for new solutions, such as X-ray lithography, fast electron beam (e-bea
Omniscient
发表于 2025-3-31 10:43:19
http://reply.papertrans.cn/16/1541/154084/154084_57.png
使虚弱
发表于 2025-3-31 16:37:55
https://doi.org/10.1007/978-3-540-44736-8, low cost and high throughput is becoming a prime necessity. Nowadays, this demand arises not only from the microelectronics community where miniaturization has been a driving strategy since a long time, but originates from many fields: optics, photonics, nanoelectronics, nano-magnetism, nano-elect
同谋
发表于 2025-3-31 19:51:41
https://doi.org/10.1007/978-3-540-44736-8 shows the general princi-ples of μCP First, an elastomeric stamp is prepared from an already existing patterned surface, called the master, by covering the surface with a liquid prepolymer (usually poly(dimethylsiloxane), PDMS) followed by curing. The hardened elastomeric stamp is peeled off the ma
Glutinous
发表于 2025-3-31 22:24:33
https://doi.org/10.1007/978-3-540-44736-8i.e. to arrange spontaneously, as a dense, ordered and stable monolayer on suitable surfaces. Generally, these molecules contain a chemically reactive head that anchors onto the surface, and a linear flexible chain of methyl groups which orients itself approximately with the normal to the surface as