Lacerate
发表于 2025-3-25 06:47:35
http://reply.papertrans.cn/16/1501/150065/150065_21.png
affinity
发表于 2025-3-25 08:35:29
http://reply.papertrans.cn/16/1501/150065/150065_22.png
消散
发表于 2025-3-25 11:57:28
http://reply.papertrans.cn/16/1501/150065/150065_23.png
Cervical-Spine
发表于 2025-3-25 19:32:31
http://reply.papertrans.cn/16/1501/150065/150065_24.png
增减字母法
发表于 2025-3-25 21:39:21
Comparative Study of Dielectric and Debris Flow in Micro-Electrical Discharge Milling Process Using of dielectric and debris in the IEG are studied using computational fluid dynamics (CFD). Comparative study of the cylindrical and slotted tool is presented with contour plots. The slotted tool is found better as compared to the cylindrical tool as the accretion of particles is very less in case of the slotted tool.
sebaceous-gland
发表于 2025-3-26 02:02:21
http://reply.papertrans.cn/16/1501/150065/150065_26.png
obstinate
发表于 2025-3-26 04:23:18
http://reply.papertrans.cn/16/1501/150065/150065_27.png
chandel
发表于 2025-3-26 09:57:53
A Model for Average Surface Roughness for Abrasive Waterjet Cut Metal Matrix Compositesults for the cutting wear region. The deformation wear results have slightly more percentage of error in comparison with the cutting wear region. Average surface roughness value is measured along the depth of penetration with noncontact confocal microscope. The average results of the cutting and deformation wear region are considered for modeling.
FUME
发表于 2025-3-26 14:31:02
http://reply.papertrans.cn/16/1501/150065/150065_29.png
Oration
发表于 2025-3-26 19:24:05
http://reply.papertrans.cn/16/1501/150065/150065_30.png