Atmosphere
发表于 2025-3-23 11:11:52
http://reply.papertrans.cn/16/1501/150065/150065_11.png
CLOUT
发表于 2025-3-23 14:14:33
Congenital Anomalies of Coronary Arteriesndividual limitations of both machining processes are restricted while improving their individual advantages. The present work focuses experimental study of Electrochemical spark drilling process. This paper also depicts mechanism of ECSM process during machining of small holes.
Irritate
发表于 2025-3-23 21:22:01
http://reply.papertrans.cn/16/1501/150065/150065_13.png
圆锥
发表于 2025-3-24 00:31:22
Congenital Neuropathic Bladder, productive to determine the machining response value simultaneously process parameter setting in minimum time and with less effort otherwise experimentally trial and error method has to be used for determining it.
没有贫穷
发表于 2025-3-24 05:50:40
Macroposthia and Congenital Megaprepuce (CM)ime glass and laminated glass. The rate of erosion is measured under various processing conditions by changing different process parameters. Effect of different process parameters on MRR is explored. The reusability of abrasive silica sand is also investigated.
isotope
发表于 2025-3-24 09:59:36
Congenital Anomalies of the Upper Extremity place during machining of micro-slit on tungsten rod with a brass wire during wire-EDG. Both machining time and consumption of tungsten electrode are minimized by employing this methodology. Finally, micro-features like micro-hole, micro-channel and square slot are fabricated on 100 µm thick SS304 sheet.
极力证明
发表于 2025-3-24 10:56:08
Powder Mixed Near Dry Electric Discharge Machining Parameter Optimization for Tool Wear Rateng input parameters was analyzed and it was revealed that tool dimensions played a major role in effecting TWR. Second, powder concentration was effective in reducing TWR followed by flow rate while pressure of mist was least significant parameter.
FLACK
发表于 2025-3-24 16:21:14
http://reply.papertrans.cn/16/1501/150065/150065_18.png
松驰
发表于 2025-3-24 19:43:07
An Experimental Study of Electrochemical Spark Drilling (ECSD)ndividual limitations of both machining processes are restricted while improving their individual advantages. The present work focuses experimental study of Electrochemical spark drilling process. This paper also depicts mechanism of ECSM process during machining of small holes.
aerial
发表于 2025-3-25 01:44:44
Experimental Study on Improving Material Removal Rate and Surface Roughness in Wire-Cut EDM of Low Cachining characteristics. The optimum parameter setting obtained for best MRR and SR in WEDM is V. = 30, T. = 80, T. = 5, and I. = 2.84. The surface texture of the machined sample is studied to estimate the responses.