蒸发
发表于 2025-3-28 14:40:21
http://reply.papertrans.cn/16/1501/150039/150039_41.png
hypnotic
发表于 2025-3-28 20:44:47
An Experimental Study on the Estimation of Field Compaction States and Stress-Strain Properties of Uum dry density (.). of a material containing large gravels is obtained by correcting laboratory test results for specimens without large gravels. Usually, the Walker–Holtz (WH) method is used for this correction, but there are many materials whose gravel ratio (.) is 0.3 − 0.4, which is usually cons
FLING
发表于 2025-3-29 02:23:58
http://reply.papertrans.cn/16/1501/150039/150039_43.png
decipher
发表于 2025-3-29 03:11:29
An Earthworks Quality Assurance Methodology Which Avoids Unreliable Correlations Yet because of its widespread usage, this now acts as an impediment to the development of alternative methods of testing. Modern geotechnical and pavement designs are based on modulus and strength values. It is, therefore, reasonable to investigate the use of alternative test methods which measures
bizarre
发表于 2025-3-29 08:07:22
Intelligent Construction for Infrastructure—The Frameworknal construction technology is also undergoing a paradigm shift. In this paper, the term “intelligent construction” is defined, and the status quo of global transportation infrastructure construction with emerging intelligent construction technologies is summarized. The framework of intelligent cons
不能约
发表于 2025-3-29 12:49:48
http://reply.papertrans.cn/16/1501/150039/150039_46.png
hermitage
发表于 2025-3-29 15:37:37
http://reply.papertrans.cn/16/1501/150039/150039_47.png
flamboyant
发表于 2025-3-29 23:12:16
http://reply.papertrans.cn/16/1501/150039/150039_48.png
牌带来
发表于 2025-3-30 03:50:00
http://reply.papertrans.cn/16/1501/150039/150039_49.png
人充满活力
发表于 2025-3-30 05:38:11
David Thomas,Anne Gardner,John DeMarcovature of the tunnel (12,461 m) exceeds the requirements of the specification (15,000 m). Grouted reinforcement can control the uneven settlement well. Radius of curvature of the tunnel can be refined to 33,967 m, which meets the requirements of the specification.