FLASK
发表于 2025-3-30 09:35:49
http://reply.papertrans.cn/15/1500/149902/149902_51.png
foodstuff
发表于 2025-3-30 14:43:11
https://doi.org/10.1007/978-1-4899-6639-1uced due to the application of corner chamfered and corner roundness on the basic model. Most of the cases both maximum pressure and suction occur on the different faces of corner chamfered models. It is also noted that the modified corner exerts more pressure than the basic model.
诱惑
发表于 2025-3-30 20:33:48
http://reply.papertrans.cn/15/1500/149902/149902_53.png
共同生活
发表于 2025-3-30 22:29:20
Distribution of Wind Pressure Around Different Shape Tall Building,lb was observed on the leeward side of setback model, which mean the increase of suction on that particular region. The excessive amount of suction envelop recognized at the top roof of setback model compared to square model.
粗鄙的人
发表于 2025-3-31 04:39:24
Wind Excitation Study of a Corner-Modified Square Tall Structure,. model) to find out the effects on force coefficients, pressure coefficients, wind flow pattern around the buildings, etc. The numerical analyses are done considering the model scale as 1:300 and for 0° angle of wind attack.
Rustproof
发表于 2025-3-31 05:54:25
http://reply.papertrans.cn/15/1500/149902/149902_56.png
悬挂
发表于 2025-3-31 09:53:56
http://reply.papertrans.cn/15/1500/149902/149902_57.png
走路左晃右晃
发表于 2025-3-31 14:13:17
http://reply.papertrans.cn/15/1500/149902/149902_58.png
条街道往前推
发表于 2025-3-31 17:51:59
http://reply.papertrans.cn/15/1500/149902/149902_59.png
使害羞
发表于 2025-3-31 22:26:03
https://doi.org/10.1007/978-94-010-0973-7tically by evaluating the radial stiffness of the bearings and the deflection at the front end of the spindle. Finite Element Analysis is carried out on the spindle bearing system, and results are compared with analytical results. Further, experiments are carried out to validate the analytical and numerical results.