鸽子
发表于 2025-3-28 15:03:46
http://reply.papertrans.cn/15/1500/149902/149902_41.png
愉快么
发表于 2025-3-28 21:55:53
http://reply.papertrans.cn/15/1500/149902/149902_42.png
extinguish
发表于 2025-3-29 02:35:05
Wind Load Analysis of a Tall Structure with Sharp and Corner Cut Edges,rp edges for the sharp edge model. However, the local pressure is minimized by the use of rounded edges at the top portion of the setback. The drag and lift coefficient decrease with the decrease of sharpness of edges. The study tries to catch the minimum local pressure due to corner cut edges of th
动作谜
发表于 2025-3-29 05:16:44
Comprehensive Characterization of Carbon Fiber-Reinforced Epoxy Composite for Aerospace Applicationwhich results in the change of properties of composites. Laminates of 0–90 orientation are fabricated, and interlaminar shear strength (ILSS) at 50, 100 and 150 °C was carried out according to Dutch Institute for Norms (DIN) for the specimens. Micro cracks in the matrix are observed due to moisture
Peculate
发表于 2025-3-29 07:15:37
http://reply.papertrans.cn/15/1500/149902/149902_45.png
CYT
发表于 2025-3-29 12:42:35
http://reply.papertrans.cn/15/1500/149902/149902_46.png
Charade
发表于 2025-3-29 18:02:11
Design and Simulation of Single-Axis MEMS Accelerometer for Low Acceleration Applications,e accelerometer. This integration was done using Coventerware turbo tool. The results obtained were compared with the accelerometer without DaCM. The displacement values that were obtained with and without DaCM are 3.1e−1 and 4.2e−2 µm, respectively. The results prove that DaCM gives an improved sensitivity.
知识
发表于 2025-3-29 22:50:10
Conference proceedings 2020cal methods. The topics covered also provide insight into the challenges prevailing in the aforementioned engineering domains and the potential solutions to address those. Given the contents, the book is a valuable resource for students as well as researchers.
精美食品
发表于 2025-3-30 02:27:13
Regulatory and Operational Issues in EFTdifference occurred at the setback roof for along wind condition. The present study concentrated on the fluctuation of time-dependent pressure between top and setback roof to take special care during the design.
极力证明
发表于 2025-3-30 04:10:58
Starr Roxanne Hiltz,Murray Turofflb was observed on the leeward side of setback model, which mean the increase of suction on that particular region. The excessive amount of suction envelop recognized at the top roof of setback model compared to square model.