身体萌芽
发表于 2025-3-28 15:57:32
http://reply.papertrans.cn/15/1499/149895/149895_41.png
易于出错
发表于 2025-3-28 19:40:16
Capturing Data in Ambulatory-Care Settingsconducted using small rectangular plates to localise simulated AE source using WT, Lamb modes and dispersion relation of plates. The result shows, due to edge reflection of AE waves, localisation in small plates is more complex than that in large plates and more study is needed to enhance the effect
Arable
发表于 2025-3-29 02:43:51
U. J. Winter,K. Wasserman,N. Treesee. So, it is required that the various elements should be modelled properly to represent the actual behaviour of structure as close as possible. In this study, modelling of two spanned symmetrical cable-stayed bridge with H-type pylon and its validation using modal analysis in SAP2000. In the presen
SMART
发表于 2025-3-29 04:39:24
http://reply.papertrans.cn/15/1499/149895/149895_44.png
开始从未
发表于 2025-3-29 10:45:33
http://reply.papertrans.cn/15/1499/149895/149895_45.png
Emasculate
发表于 2025-3-29 14:25:51
Arthur A. Teixeira,Charles F. Shoemakerquake. The present study analyzes the efficacy of an Ultra-High Molecular Weight Polyethylene (UHMWPE) liner to lower the amount of seismic energy conveyed and the dynamic response of buildings. Finite element simulation of the transient response of an integrated soil isolation-building system in wh
Flawless
发表于 2025-3-29 16:47:38
http://reply.papertrans.cn/15/1499/149895/149895_47.png
吞吞吐吐
发表于 2025-3-29 22:14:22
Computerized Modeling of Sedimentary Systems strength in materials, viz. concrete and reinforcing steel. In the present work, composite of steel and carbon fiber reinforced polymer is used as flexure reinforcement. The composite reinforcement was fabricated in the laboratory by sandwiching woven carbon fiber fabric between steel flats with ad
连词
发表于 2025-3-30 03:37:57
http://reply.papertrans.cn/15/1499/149895/149895_49.png
Prophylaxis
发表于 2025-3-30 07:54:40
F. P. Agterberg,F. M. Gradsteinnd also to preserve land in rural areas for agricultural use (Smith and Coull .). The design of tall buildings is primarily governed by wind and seismic loads (Chaudhary et. al. .). The performance of the buildings depends on the structural configuration and the present study aims at comparing the p