遵循的规范
发表于 2025-3-25 05:43:22
Ductility Behaviour of Concrete Beams with Flexural Steel-CFRP Composite Reinforcement,0 mm centre-to-centre, applying two equal symmetrical concentrated loads with a shear span of 400 mm. The deflection at mid-span, deflection ductility ratio, and load-carrying mechanism of the beams with composite reinforcement have been discussed and compared with the beam having longitudinal conve
搜集
发表于 2025-3-25 11:23:17
Seismic Performance of Tall Buildings with Different Structural Systems,tailed analysis of the building system is done by modeling the geometry, material section properties and boundary conditions. The sections are discretized using FE mesh using software “ETABS 2016”. Appropriate finite elements are assigned to beams and columns; slab is modeled as a rigid diaphragm to
支柱
发表于 2025-3-25 15:36:19
http://reply.papertrans.cn/15/1499/149895/149895_23.png
Flatter
发表于 2025-3-25 16:23:56
http://reply.papertrans.cn/15/1499/149895/149895_24.png
无目标
发表于 2025-3-25 23:18:21
Design and Construction Features of Temporary Housing for Flood Rehabilitation Through Tactical Urb selected building components using the principles of Pre-Engineered Buildings (PEB). The roof design consists of an inner water-proof sheet covered with metal sheets as claddings. The structure is tested for its stability under additional weight-loading and wind effects. The limit-state based desig
Flavouring
发表于 2025-3-26 03:47:43
Damage Localization in Reinforced Concrete Slab Using Acoustic Emission Technique,lysis of the AE waveforms in the frequency domain using Fast Fourier Transform (FFT) or Short Time Fourier Transform (STFT) or in time frequency domain using wavelet transform is also being used by the researchers in the past for localizing the damage in thin metal and multi-layered composite plates
VOK
发表于 2025-3-26 08:21:42
Study on the Effect of Wheel Load and Temperature on Rutting Damage of Composite Flexible Pavement a inter-layer membrane is also introduced across the pavement thickness. In order to study the critical strain and deflection, a three-dimensional finite element model formulated with ANSYS software is used for the analysis. Under the application of static loading, linear material parameters for the
Synapse
发表于 2025-3-26 11:47:49
http://reply.papertrans.cn/15/1499/149895/149895_28.png
Mosaic
发表于 2025-3-26 12:38:20
On the Applicability of Wavelet Transform in Localising Defect in a Small Plate Using AE Technique:conducted using small rectangular plates to localise simulated AE source using WT, Lamb modes and dispersion relation of plates. The result shows, due to edge reflection of AE waves, localisation in small plates is more complex than that in large plates and more study is needed to enhance the effect
共同给与
发表于 2025-3-26 19:00:03
U. J. Winter,K. Wasserman,N. Treeseered), uniform phase lag of ground acceleration and shear wave velocity on seismic reliability. The study reveals that the greater the phase lag, greater is the reliability of the bridge. It also reveals that change in pylon shape has no influence on the reliability of the deck but it has more influ