妨碍议事
发表于 2025-3-23 12:05:55
Rehabilitation and Habilitation, that undergoes back extrusion. Commercially available software Abaqus has been used in the analysis. A 2D axisymmetric model has been developed to do the studies. The results obtained are promising and can be used for further research.
Restenosis
发表于 2025-3-23 17:12:30
Modern Acoustics and Signal Processing are laser power, pulse frequency, laser scan speed, and the number of scan while responses considered are surface roughness parameters, i.e., . and .. The experimental results show that aforesaid factors revealed huge influences on surface finish criteria on machined micro-channel on zirconia ceramics.
Kernel
发表于 2025-3-23 21:41:24
Rehabilitation and Habilitation,In the present study, material model used for hammer and skin is plastic kinematic, and Deshpande–Fleck material model is used to model the aluminum foam. Based on the developed FE-model, energy absorption by each drop impact test is calculated using the force–displacement relation for the impact velocities considered in the present study.
要素
发表于 2025-3-24 02:10:01
http://reply.papertrans.cn/15/1488/148781/148781_14.png
FLAX
发表于 2025-3-24 06:16:51
Rehabilitation and Habilitation,verified through analysis of variance (ANOVA). The outcomes of the analysis of variance indicate that the proposed regression models are well suited. Meanwhile, the predicted results were validated by performing a confirmation test, and error was found within the acceptable level.
CHYME
发表于 2025-3-24 10:00:14
http://reply.papertrans.cn/15/1488/148781/148781_16.png
Albinism
发表于 2025-3-24 12:40:50
http://reply.papertrans.cn/15/1488/148781/148781_17.png
Expurgate
发表于 2025-3-24 15:10:30
Modern Acoustics and Signal Processinge to tool wear effect, and microhardness value increases due to strain hardening. The magnitude of burr width also increases with increase in feed rate and machining length due to more chip load and deterioration of sharpness of the tool, respectively.
天赋
发表于 2025-3-24 23:03:22
Rehabilitation and Habilitation, rolling element bearing operating at a fluctuating speed of approximately 5–15 Hz. Experiments were conducted using Spectraquest machine faults simulator. Rolling element bearing with fault in the outer race is taken to show the effectiveness of the diagnosis scheme.
延期
发表于 2025-3-25 02:58:52
http://reply.papertrans.cn/15/1488/148781/148781_20.png