Consensus
发表于 2025-3-30 11:32:49
https://doi.org/10.1007/978-1-4419-7545-4surface has been studied. During the experimentation, at a traverse speed of 30 mm/s accidently the change in frequency was encountered in the repeated test (under same treatment condition) which has been reported in this work. The frequency was changed from .= 20.11 kHz to . = 20.27 kHz during the
绊住
发表于 2025-3-30 12:34:38
Sensor-Centric System Developmentsted. The article focuses on microstructure damage processes and kerf geometry in AWJ machining of TiB.+Ti composites. Two different abrasive water jet cutting speeds and three sorts of composite materials, together with a reference monolithic one, are considered. Microstructure in machined samples w
Obsequious
发表于 2025-3-30 18:02:09
http://reply.papertrans.cn/15/1488/148726/148726_53.png
Minuet
发表于 2025-3-30 21:19:46
http://reply.papertrans.cn/15/1488/148726/148726_54.png
等待
发表于 2025-3-31 03:18:43
http://reply.papertrans.cn/15/1488/148726/148726_55.png
食物
发表于 2025-3-31 05:07:43
http://reply.papertrans.cn/15/1488/148726/148726_56.png
Biofeedback
发表于 2025-3-31 10:01:39
Working with In-Transit Data and Analytics, behaviors. The main emphasis is placed on numerical modelling of high speed water jet generation inside a circular nozzle and its outlet. The theoretical studies are performed based on the 3D geometry of nozzle received from the computed tomography. The models are experimentally verified by flow mo
Lime石灰
发表于 2025-3-31 14:48:55
http://reply.papertrans.cn/15/1488/148726/148726_58.png
UNT
发表于 2025-3-31 18:31:09
Sergej Hloch,Dagmar Klichová,Lucie RuppenthalováReports on cutting-edge research on (un)conventional manufacturing.Highlights important points of contact between academic research and industrial development.Covers a broad range of fabrication proce
惹人反感
发表于 2025-4-1 01:03:53
http://reply.papertrans.cn/15/1488/148726/148726_60.png