STIT
发表于 2025-3-28 14:52:51
http://reply.papertrans.cn/15/1467/146611/146611_41.png
使饥饿
发表于 2025-3-28 19:30:35
https://doi.org/10.1057/9781137367600nozzles. Bi-particulate powder flow simulations were carried out using discrete element modeling through LIGGGHTS open-source software. Then, the temperature distribution on the powder particles on the base plate was captured using finite element simulations using COMSOL.
性行为放纵者
发表于 2025-3-29 00:40:57
On the Borders of the Reading Public, and medicine. The customized complex parts produced using 3D printing have generally rough surfaces; the surface may contain partially sintered particles. Therefore, the surface quality needs to be enhanced; surface roughness should be decreased for further applications, and dimensional accuracy i
Tidious
发表于 2025-3-29 05:21:58
http://reply.papertrans.cn/15/1467/146611/146611_44.png
大方不好
发表于 2025-3-29 11:19:38
On the Borders of the Reading Publicotential methods of achieving complex parts with known properties. The layer-by-layer approach through DMLS builds the required geometry, whereas the achievable surface finish is challenging. Effective techniques in post-processing are required to improve the surface finishing of additive parts as t
惊奇
发表于 2025-3-29 13:41:00
http://reply.papertrans.cn/15/1467/146611/146611_46.png
gastritis
发表于 2025-3-29 17:06:19
Tour of the Sunshine State, March 1912,manufacturing are combined. Poor surface quality is the prime drawback associate with additively manufactured implant components. Detailed analysis on the different metal-based additive manufacturing processes such as laser engineering net shaping, selective laser melting, wire arc additive manufact
neuron
发表于 2025-3-29 21:25:00
Canons’ Clockwork: Novels for Everyday Usenitrile butadiene styrene (ABS) is a commonly used 3D printing thermoplastic polymer with applications in various industries, viz., automotive and aerospace. Fused deposition modeling (FDM) is the most popular and extensively used extrusion-based AM technique to fabricate plastic parts, though the s
弄脏
发表于 2025-3-30 00:06:51
http://reply.papertrans.cn/15/1467/146611/146611_49.png
Harness
发表于 2025-3-30 05:51:24
http://reply.papertrans.cn/15/1467/146611/146611_50.png