荨麻
发表于 2025-3-25 05:37:24
http://reply.papertrans.cn/15/1467/146611/146611_21.png
思考而得
发表于 2025-3-25 09:45:50
http://reply.papertrans.cn/15/1467/146611/146611_22.png
蛙鸣声
发表于 2025-3-25 14:56:51
https://doi.org/10.1007/978-3-031-13268-1e desired density of the part. A good agreement was indicated between the predicted and experimental data. The study revealed the applicability and potential of the model to determine and predict the density of the additively manufactured parts.
问到了烧瓶
发表于 2025-3-25 16:46:40
Montserrat Cachero,Natalia Maillard-Álvarezy desired object. So, to get rid of this confusion need to know some immediate decision-making techniques. Analytical network process (ANP) and multi-objective optimization by ratio analysis (MOORA) are one of the most important immediate decision-making techniques. These two methods provide a basis
Incommensurate
发表于 2025-3-25 22:16:19
Montserrat Cachero,Natalia Maillard-Álvarezre computed to measure the relative performance of each filtering method. 2nd-order Gaussian regression filter effectively filtered out weld tracks while the morphological filter showed their suitability for extraction of partially melted particles. Parameters ., ., ., . showed a relationship with t
CREST
发表于 2025-3-26 00:36:45
http://reply.papertrans.cn/15/1467/146611/146611_26.png
Demonstrate
发表于 2025-3-26 05:29:38
On the Borders of the Reading Public not only surface quality but also mechanical efficiency. In this study, chemical polishing of 3D printed Inconel 718 using three different compositions H.SO. + methanol, ethanol + HCl + FeCl. and HF + HCl + HNO. is studied and tried to optimize the chemical composition to achieve a better surface f
fibula
发表于 2025-3-26 11:53:33
http://reply.papertrans.cn/15/1467/146611/146611_28.png
defile
发表于 2025-3-26 15:57:07
http://reply.papertrans.cn/15/1467/146611/146611_29.png
reptile
发表于 2025-3-26 19:09:20
https://doi.org/10.1057/9780230244801sufficient for the complete transfer. Then the spot overlap is varied with 30%, 60%, and 90%, and observed that with an increase in overlap % the pixel density increases leading to a continuous line pattern. The deposited geometry‘s surface morphology has been analyzed using a scanning electron micr