hazard
发表于 2025-3-28 14:46:39
http://reply.papertrans.cn/15/1459/145870/145870_41.png
失眠症
发表于 2025-3-28 22:48:53
http://reply.papertrans.cn/15/1459/145870/145870_42.png
裙带关系
发表于 2025-3-29 00:07:40
Lecture Notes on Multidisciplinary Industrial Engineeringhttp://image.papertrans.cn/a/image/145870.jpg
GOUGE
发表于 2025-3-29 05:17:01
Advanced Manufacturing and Materials Science978-3-319-76276-0Series ISSN 2522-5022 Series E-ISSN 2522-5030
N斯巴达人
发表于 2025-3-29 10:37:12
Bildatlas der Lungensonographie tool applies pressure over workpiece surface and this creates compressive stresses. To analyse these stresses the finite element analysis is done with the help of ANSYS software. The stresses developed on the workpiece surface and the total deformation in workpiece is found using this software.
Apogee
发表于 2025-3-29 14:04:27
Wolfgang Blank OA,Thomas Müllerachining is performed using three tungsten carbide electrodes (untreated, cryogenically treated single and double tempered electrodes). Microstructural analysis has been carried out for the machined surfaces. From this study it is observed that, deep cryotreated post tempered electrodes considerably decrease the radial overcut.
Tracheotomy
发表于 2025-3-29 19:14:44
http://reply.papertrans.cn/15/1459/145870/145870_47.png
粗俗人
发表于 2025-3-29 20:17:38
Standards zur Einzelbildkompression (JPEG),mechanical properties like tensile, flexural and impact strength are compared. From the comparative study, it is understood that Kenaf/glass hybrid samples are having mechanical strength value 40–50% higher than that of other types of samples tested.
报复
发表于 2025-3-30 03:18:35
http://reply.papertrans.cn/15/1459/145870/145870_49.png
Glaci冰
发表于 2025-3-30 06:17:54
http://reply.papertrans.cn/15/1459/145870/145870_50.png