EXCEL
发表于 2025-3-25 06:52:50
https://doi.org/10.1007/978-3-319-76276-0additive manufacturing; casting technology; metal cutting; metal forming; welding technology; virtual man
Comedienne
发表于 2025-3-25 10:34:52
http://reply.papertrans.cn/15/1459/145870/145870_22.png
FAWN
发表于 2025-3-25 12:06:13
http://reply.papertrans.cn/15/1459/145870/145870_23.png
开花期女
发表于 2025-3-25 17:03:34
http://reply.papertrans.cn/15/1459/145870/145870_24.png
corn732
发表于 2025-3-25 21:41:12
Wolfgang Blank OA,Thomas Müllerectro discharge machining (EDM) is one of the most extensively used machining method among all the nonconventional machining processes. Cryogenic treatment is introduced in this process for improving the tool life as well as reducing the machining cost. In this investigation, effect of deep cryogeni
暴发户
发表于 2025-3-26 03:43:22
http://reply.papertrans.cn/15/1459/145870/145870_26.png
lipids
发表于 2025-3-26 07:04:56
http://reply.papertrans.cn/15/1459/145870/145870_27.png
BOON
发表于 2025-3-26 12:22:00
http://reply.papertrans.cn/15/1459/145870/145870_28.png
FEIGN
发表于 2025-3-26 13:41:45
https://doi.org/10.1007/978-3-7091-6479-2 In the present study, filler metal from 30 to 80 mg was added to the spot weld to study its effect on mechanical behaviour of spot weldments. The composition of the filler metal added was same as that of base metal. Effects of the filler metal and its quantity on failure mode was discussed on 1.5-
CUR
发表于 2025-3-26 17:41:02
http://reply.papertrans.cn/15/1459/145870/145870_30.png