vascular
发表于 2025-3-23 13:45:08
3D FEA Simulations in Machining978-3-031-24038-6Series ISSN 2191-530X Series E-ISSN 2191-5318
600
发表于 2025-3-23 15:47:43
Front Matterss is essential to reduce the risk of sudden clotting caused by vascular stenosis, to maintain patency of the access, and to avoid hospitalization or central catheter placement. Current imaging technologies are costly and unsuitable for widespread monitoring of vascular access, and they cannot detec
价值在贬值
发表于 2025-3-23 18:51:23
http://reply.papertrans.cn/11/1008/100713/100713_13.png
东西
发表于 2025-3-24 01:06:32
FEM-Based Study of AISI52100 Steel Machining: A Combined 2D and 3D Approach,d have not only revolutionised the manner glycaemic status in diabetes is assessed but have provided newer metrics of evaluation, including ‘time in range’ and the importance of glycaemic variability as an independent association with vascular complications. The focus on lifestyle management for wei
CRUDE
发表于 2025-3-24 04:06:28
http://reply.papertrans.cn/11/1008/100713/100713_15.png
Gyrate
发表于 2025-3-24 08:03:02
3D Finite Element Simulation of CK45 Steel Face-Milling: Chip Morphology and Tool Wear Validation,ogy. It is a functional organ biomimic model built on a dynamic microfluidic chip that replicates the architecture, physiology and functionality of an organ as observed in vivo. This tissue chip technology has the potential to be utilized for drug screening and safety testing during preclinical tria
Manifest
发表于 2025-3-24 14:35:00
http://reply.papertrans.cn/11/1008/100713/100713_17.png
BUDGE
发表于 2025-3-24 16:06:00
23. Internationales Stuttgarter Symposiumion is included to meshing, element types, contact interface, and boundary conditions. Finally, the most recent modifications and advances in the various models implemented in FEM are presented, as well as the state of the art, especially in three dimensions.
ATP861
发表于 2025-3-24 22:47:07
https://doi.org/10.1007/978-3-658-42236-3 set of drilling tests was conducted with a CNC machine. Moreover, the results (thrust force and cutting torque) were outputted via a dynamometric system. The yielded numerical and experimental results demonstrated an increased agreement, with the relative error varying at reasonable levels for both cutting force and torque.
Admonish
发表于 2025-3-24 23:12:45
http://reply.papertrans.cn/11/1008/100713/100713_20.png