六边形
发表于 2025-3-25 06:15:32
http://reply.papertrans.cn/11/1007/100615/100615_21.png
NATTY
发表于 2025-3-25 10:35:05
978-3-030-95465-9The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl
Graphite
发表于 2025-3-25 11:45:53
http://reply.papertrans.cn/11/1007/100615/100615_23.png
字形刻痕
发表于 2025-3-25 17:28:44
http://reply.papertrans.cn/11/1007/100615/100615_24.png
SIT
发表于 2025-3-25 20:10:47
http://reply.papertrans.cn/11/1007/100615/100615_25.png
贞洁
发表于 2025-3-26 00:38:22
Gesundheitsreform in Deutschlandicrostructure. A comparison is set up between both coatings at different stages of tool life. Additionally, parameter studies determining cross and shear tensile strength at each stage show the variation of optimized welding parameters according to the occurring wear mechanisms on the tool. Thus, th
Mangle
发表于 2025-3-26 05:25:38
http://reply.papertrans.cn/11/1007/100615/100615_27.png
含沙射影
发表于 2025-3-26 11:25:26
http://reply.papertrans.cn/11/1007/100615/100615_28.png
期满
发表于 2025-3-26 16:38:24
https://doi.org/10.1007/978-3-658-02702-5s defined by the formation of macroscopic weld spatters, which can endanger the quality of the weld result. It is shown, that all the input parameters investigated have a significant influence on the achievable bond width. In particular, very short current rise times and low electrode forces severel
注视
发表于 2025-3-26 18:59:19
https://doi.org/10.1007/978-3-658-03254-8lished that the optimized brazing process conditions are: (i) the peak temperature of T = 950 ℃ and (ii) the dwell time at the peak of t = 20 min. The element diffusion processes of high nitrogen steel brazing have been considered by using molecular dynamics simulations. The diffusion processes of F