caldron
发表于 2025-3-28 18:23:33
https://doi.org/10.1007/978-3-662-64239-9ins, due to the actuating R.RGR linkage, are the key benefits of this arrangement. This paper aims to identify and evaluate the robotic structure‘s kinematic performance. MathWorks MATLAB was used to evaluate different setups and determine the performance indices of the presented structure.
美学
发表于 2025-3-28 19:56:49
http://reply.papertrans.cn/11/1006/100577/100577_42.png
阻塞
发表于 2025-3-28 23:46:13
http://reply.papertrans.cn/11/1006/100577/100577_43.png
Throttle
发表于 2025-3-29 04:15:49
http://reply.papertrans.cn/11/1006/100577/100577_44.png
租约
发表于 2025-3-29 10:46:17
http://reply.papertrans.cn/11/1006/100577/100577_45.png
peptic-ulcer
发表于 2025-3-29 12:39:21
https://doi.org/10.1007/978-3-662-64675-5 a variety of devices in each group. Our research paper also offers valuable insight regarding the state of the art and stands as base for future research and development of more intuitive devices to control industrial robots.
degradation
发表于 2025-3-29 19:20:09
https://doi.org/10.1007/978-3-662-64789-9ors aim to ensure the alignment of the ankle joint‘s center and the intersection point of rotation axes for the sole supporting plate, enhancing the recuperation of ankle joint. In this paper some functional tests were perform and discussed for the improved design, in order to validate the theoretical approach.
CLAN
发表于 2025-3-29 22:21:39
Übungsbuch zur Linearen Algebrae two analyzed. Several aspects related to the modeling of the relative localization process, analysis of measurement errors, technological considerations regarding the placement of passive beacons and the specific calculations developed for their 2D and 3D layout variants in relation to a mobile robot are included.
Fortuitous
发表于 2025-3-30 02:50:27
Peter Winker,Christoph Funk,Elena Tönjesented to show the feasibility of the proposed 3D printer with five-bar linkages. By using the Finite Element Analysis is estimated the deflection of the extruder in comparison with a similar 2-bar open-loop 3D printer architecture.
Hdl348
发表于 2025-3-30 07:19:49
http://reply.papertrans.cn/11/1006/100577/100577_50.png