平 发表于 2025-3-23 13:08:22
http://reply.papertrans.cn/99/9828/982746/982746_11.png安慰 发表于 2025-3-23 15:49:02
http://reply.papertrans.cn/99/9828/982746/982746_12.pngAggressive 发表于 2025-3-23 21:31:04
http://reply.papertrans.cn/99/9828/982746/982746_13.pngThrombolysis 发表于 2025-3-23 22:13:43
Investigation of the Synchronous Response in a Back-Back Centrifugal Compressor Due to Imbalance andcompressor. This back to back, two stage, nine-impeller compressor is used to compressor natural gas associated with oil production in a particular field within the Sultanate of Oman. The case study investigated involved replicating vibration problems experienced in the field with a rotor-dynamic mogrovel 发表于 2025-3-24 04:35:14
Comparison of On-Bearing and On-Casing Vibration for Blade Health Monitoring in Rotating Machineoth in the healthy and crack conditions are studies on a small experimental rig using the on-bearing and on-casing vibration, which are measured using the accelerometer on bearing pedestals and on casing cover towards on blades. The measured vibration data are analyzed by computing the responses at和蔼 发表于 2025-3-24 07:05:13
http://reply.papertrans.cn/99/9828/982746/982746_16.pngCHYME 发表于 2025-3-24 12:15:34
http://reply.papertrans.cn/99/9828/982746/982746_17.png预测 发表于 2025-3-24 18:25:50
Application of Composite Spectrum in Steam Turbo-Generator Seteasured vibration data at all the machine bearings in the frequency domain is used to construct such a composite spectrum and composite bispectrum for the representation of the entire machine. These techniques are now applied to a Turbo-generator (TG) set which consists of a high pressure (HP) turbi不可磨灭 发表于 2025-3-24 19:08:17
http://reply.papertrans.cn/99/9828/982746/982746_19.pnginsurrection 发表于 2025-3-25 01:18:05
Vibration Behaviour of a Turbo-Generator Sete operation. A typical phenomenon of appearance of low frequencies in band of 7–12 Hz is observed mainly related to the vibration measurements on low pressure (LP) turbines bearing pedestals. This band of frequency observed to be modulating with vibration at the machine RPM (50 Hz) and its higher ha