柔美流畅
发表于 2025-3-23 11:41:34
http://reply.papertrans.cn/99/9802/980112/980112_11.png
辩论
发表于 2025-3-23 13:54:33
Design of Ultralow-Power and High-Speed Comparator Using Charge Sharing Technique,s provided in this article, and the suggested comparator‘s power dissipation is quite low. The latch stage of the comparator uses pass transistors (PMOS). In the meantime, NMOS cross-coupled transistors increase gain and speed in the latch stage. In contrast to the earlier described comparator, the
一条卷发
发表于 2025-3-23 21:57:51
http://reply.papertrans.cn/99/9802/980112/980112_13.png
pulmonary
发表于 2025-3-24 02:12:28
Study and Analysis of Three-Stage Single-Miller CMOS OTA,pacitor, and inner half feed-forward (ASMIHF) amplifier. Frequency compensation network employs a single-Miller capacitor, and an inverting current buffer is incorporated in the input stage of the amplifier. A feed-forward route and a slew rate enhancement circuit are used to extend the large-signal
prick-test
发表于 2025-3-24 04:00:40
http://reply.papertrans.cn/99/9802/980112/980112_15.png
notion
发表于 2025-3-24 09:00:32
http://reply.papertrans.cn/99/9802/980112/980112_16.png
尖叫
发表于 2025-3-24 10:55:24
,High Speed LVDS Driver Design with Fast Settling Common Mode Feedback Circuit,er cables or through circuit board metal tracks. This is a backbone of high speed transmission specified by EIA/IEEE standard. This driver circuit is designed in 0.18 .m CMOS technology and can transmit at data rate of 1.25 Gbps. It requires single power supply of 3.3 V. This design has common mode
BARK
发表于 2025-3-24 16:03:01
Design and Analysis of Low Power Frequency Divider Circuit,een reported in this paper. Circuit performance and stability have been improved by using a dynamic signal driving strategy that maintains minimum power consumption with 0.8 V supply voltage and 90 nm process technology. A very low number of components are used which will helps to provide minimum ar
直觉没有
发表于 2025-3-24 22:28:05
http://reply.papertrans.cn/99/9802/980112/980112_19.png
沙文主义
发表于 2025-3-25 00:14:41
Design of Y-shaped Multiband Antenna Using the Parametric Approach for Wireless Networks, mode harmonics. In wireless communication, where the antenna size is limited, microstrip antennas are more advantageous. The targeted frequency ranges are 2.3–2.5, 3.1–3.5, 3.8–4.2, and 6.2–6.7 GHz. 2.4 GHz frequency is used in one of the Wi-Fi frequency bands. Any frequency band in the range of 3.