aggravate
发表于 2025-3-25 03:59:44
,Die Abnahme der Oberflächenrauhigkeit einer maschinell geschliffenen Klinge durch Ströpen, Pließtenangewandten Arbeitsgängen vorliegen. Der Ausgangszustand der Klingenfläche ist für das elektrolytische Polieren von ausschlaggebender Bedeutung. Er beeinflußt nicht nur in erheblicher Weise die anzuwendende Polierdauer, sondern ist praktisch auch maßgebend für den Endzustand der Oberfläche.
脱水
发表于 2025-3-25 09:37:36
http://reply.papertrans.cn/95/9436/943515/943515_22.png
Cupidity
发表于 2025-3-25 12:38:07
http://reply.papertrans.cn/95/9436/943515/943515_23.png
夹克怕包裹
发表于 2025-3-25 16:38:02
s presented to suppress the hotspots in the later sections. Subsequently, experimental investigation with different hotspot conditions is conducted to demonstrate and validate the feasibility of this concept.
Certainty
发表于 2025-3-25 21:36:40
http://reply.papertrans.cn/95/9436/943515/943515_25.png
后天习得
发表于 2025-3-26 00:58:04
Fachverband Schneidwarenindustrie, Solingenque to thermal conductivity measurements of the skutterudite superconductor LaPt4Ge12, the thesis proves that the system is a conventional superconductor with a single energy gap. Thus, it refutes the widesprea978-3-319-81910-5978-3-319-39543-2Series ISSN 2190-5053 Series E-ISSN 2190-5061
信条
发表于 2025-3-26 07:58:41
Fachverband Schneidwarenindustrie, Solingene, and the Brief introduces the reader to this concept. The authors also address defects and failures. They introduce selected indicators, which can help identifying failures of the entire food/packaging system978-3-319-74131-4978-3-319-74132-1Series ISSN 2191-5407 Series E-ISSN 2191-5415
抗生素
发表于 2025-3-26 10:43:54
http://reply.papertrans.cn/95/9436/943515/943515_28.png
滑动
发表于 2025-3-26 13:28:06
true of any textual introduction to this science; yet, by considering concrete systems, it is easier to provide insight into the fundamental laws of the science and to provide an intuitive feeling for further study.
身心疲惫
发表于 2025-3-26 16:59:18
Fachverband Schneidwarenindustrie, Solingenxperimental methods were reviewed, with the inclusion of the more recently developed unsteady state techniques. Finally, discussion is presented on the use of thermally conductive compositions in heat exchangers where the thermal conductivity is of primary importance to the performance of the device.