完成才能战胜
发表于 2025-3-27 00:42:21
http://reply.papertrans.cn/89/8842/884162/884162_31.png
使长胖
发表于 2025-3-27 01:08:56
Walking Robot Applied to the Tube Inspection Activityoducts, there are some problems with using the transport through tubes, such as the difficulty in maintenance and in inspection to predict future troubles. Another recurring problem in industries is the sliding of the maintenance robot along the inner walls of the tube, which can cause the robot to
葡萄糖
发表于 2025-3-27 07:20:45
Hybrid Omnidirectional Wheeled Climbing Robot with an Electromagnet for Inspectione roller wheels for proper asymmetric friction force generation and a controllable electromagnet for ferromagnetic surface adhesion. The friction force of rubber and silicone rollers and the adhesion force of the electromagnet were investigated. An embedded electronic system with a mobile processor
我邪恶
发表于 2025-3-27 11:51:55
A Didactic Approach to Energy-Based Dynamic Modeling: Least Action, D’Alembert Principle and Euler-Lysics and mechanics. However, they can be challenging for science and engineering students, especially for those in the early stages of their studies, due to the technical terminology and jargon used in these fields. This article aims to offer a simple and didactic approach to help students better u
GULLY
发表于 2025-3-27 17:18:41
http://reply.papertrans.cn/89/8842/884162/884162_35.png
摘要
发表于 2025-3-27 19:26:04
Design and Development of an Omnidirectional Mecanum Platform for the RobotAtFactory 4.0 Competitioncs. These competitions encompass various disciplines, such as programming, electronics, control systems, and prototyping, often beginning with developing a mobile platform. This paper focuses on designing and implementing an omnidirectional mecanum platform, encompassing aspects of mechatronics, mec
漫步
发表于 2025-3-28 00:11:58
Single-Segment Analysis for the Performance Optimization of a Tilt-Rotor All-Electric RPAS. ProVANT-ll-electric RPAS using a single-segment approach. This study focuses on the calculations over a nominal mission, while optimization techniques are considered from power consumption requirements. The results highlight the accuracy of the physical characterization, which incorporates propulsive and ae
Decline
发表于 2025-3-28 04:00:10
Parametric Aerodynamic Study of a Convertible Aircraft Using CFD Tools. ProVANT EMERGENTIa ProjectonvERtible aircraft for rapid and efficient deployment in emerGENcy situaTIons). The CFD aerodynamics of a convertible aircraft at different attack (.) and yaw (.) angles will be studied and then compared with wind tunnel to improve the confidence level of the results by obtaining the same results u
Pcos971
发表于 2025-3-28 07:30:16
Design and Development of an Omnidirectional Mecanum Platform for the RobotAtFactory 4.0 Competitioning a mobile platform. This paper focuses on designing and implementing an omnidirectional mecanum platform, encompassing aspects of mechatronics, mechanics, electronics, kinematics models, and control. Additionally, a simulation model is introduced and compared with the physical robot, providing a means to validate the proposed platform.
absolve
发表于 2025-3-28 10:24:37
Multidimensional Map: A Conceptual Design Tool to Develop Robots for Power Linesmensional Map can be used to analyze a given robot concept on 13.8 and 23.1 kV distribution lines. It is also shown how to determine the minimum requirements for a safety operation. The Multidimensional Map aided the design team in identifying the most promising concept.