一起平行
发表于 2025-3-23 11:20:30
2210-4410 nowledge, then propose alternative solutions. It will therefore help all scientists, decision-makers, professors, farmers and politicians who wish to build a safe agriculture, energy and food system for future generations..978-94-007-9372-9978-94-007-5961-9Series ISSN 2210-4410 Series E-ISSN 2210-4429
Lucubrate
发表于 2025-3-23 15:18:01
osition of the additional weight. Also when the angle of the sloping section was reduced from the 45° to 30°, the horizontal impact force was roughly halved. On the other hand, when the angle was increased from 45° to 60°, the horizontal impact force was roughly doubled. Generally, 45° is used for t
Allowance
发表于 2025-3-23 18:36:45
http://reply.papertrans.cn/89/8830/882956/882956_13.png
条约
发表于 2025-3-23 23:58:49
http://reply.papertrans.cn/89/8830/882956/882956_14.png
使高兴
发表于 2025-3-24 03:39:32
http://reply.papertrans.cn/89/8830/882956/882956_15.png
最低点
发表于 2025-3-24 10:05:55
http://reply.papertrans.cn/89/8830/882956/882956_16.png
要控制
发表于 2025-3-24 13:03:07
Johannes M. S. Scholberg,Lincoln Zotarelli,Michael D. Dukes,Monica Ozores-Hampton,Guodong Liu,Pablo using the dedicated shear and flexural steel plate arrangement to combine bending and shear deformation modes for the yielding of steel. This paper discussed development of slit damper for dissipation of input seismic energy through combined bending and shear deformations in RC precast frame buildin
CUR
发表于 2025-3-24 14:57:31
Nikolaos P. Nikolaidis,G. Bidogliorate of 2.0 mm/s. The cyclic tests showed that the lead damper’s characteristics, e.g., damper force, initial stiffness, hysteretic behavior, and damping properties, were considerably affected by the amount of prestressing on lead. Increasing the lead prestressing levels resulted in more stable hyst
nonsensical
发表于 2025-3-24 21:44:06
http://reply.papertrans.cn/89/8830/882956/882956_19.png
graphy
发表于 2025-3-25 01:54:26
Rima Kumari,Majeti Narasimha Vara Prasadtion. Specially designed and detailed various geometries of a metallic fuse elements will be used, that will be sacrificed before the structure is damaged and will convert seismic energy into various other energies and will help to reach resilience targets..Numerical comparisons of the mechanical be