bisphosphonate
发表于 2025-3-25 06:02:34
http://reply.papertrans.cn/89/8830/882955/882955_21.png
BRUNT
发表于 2025-3-25 09:05:52
http://reply.papertrans.cn/89/8830/882955/882955_22.png
乏味
发表于 2025-3-25 14:28:02
Fahd Rasul,Ashfaq Ahmad,Muhammad Arif,Ishaq Ahmad Mian,Kawsar Ali,Muhammad Farooq Qayyum,Qaiser Hussnical properties depends on many factors, and the relationship among these factors is non-linear and complex, but the emerging machine learning techniques have made this task quite easy for geotechnical engineers. In this present paper, an attempt has been made to predict liquefaction based on 68 in
Colonnade
发表于 2025-3-25 18:06:42
http://reply.papertrans.cn/89/8830/882955/882955_24.png
出处
发表于 2025-3-25 21:25:01
http://reply.papertrans.cn/89/8830/882955/882955_25.png
AMITY
发表于 2025-3-26 02:06:26
Peyman Habibi,Maria Fatima Grossi De Sa,Abdullah Makhzoum,Sonia Malik,André Luís Lopes da Silva,Kathom the material of Part 2 (and p.2–60 in particular) that identifiable acoustic contrasts are most likely if the hydrocarbon is .. We remember (Question 5, p.2–73) that significant distinctions of reflection coefficient between oil-saturation and water-saturation can occur if the overlying material
BIDE
发表于 2025-3-26 07:18:40
http://reply.papertrans.cn/89/8830/882955/882955_27.png
偏见
发表于 2025-3-26 08:28:20
Elizabeth T. Alori,Michael O. Dare,Olubukola O. Babalolas are routinely used to estimate attributes like P-impedance, S-impedance, density, the ratio of P-wave and S-wave velocities and elastic impedances from seismic and well log data. These attributes help to understand lithology and fluid contents in the subsurface. There are several seismic inversion
aviator
发表于 2025-3-26 15:36:21
Msafiri Yusuph Mkonda,Xinhua Heand the seismic isolated buildings, ensuring safety and functional maintenance after earthquakes. In this study, collision experiments were conducted to determine the magnitude of the horizontal impact force generated by the collision of the main panel to a sloping section on the exterior structures
dura-mater
发表于 2025-3-26 17:59:13
nt, such as performances under twice of the design compressive stress or under high-speed shearing rate, etc. Therefore, to ensure adequate safety margin, the limited design axial force is always low. And the high-speed shearing performances of the friction pendulum bearing rely on theoretical analy