反感 发表于 2025-3-26 23:56:18
http://reply.papertrans.cn/89/8801/880058/880058_31.pngdecode 发表于 2025-3-27 01:59:29
http://reply.papertrans.cn/89/8801/880058/880058_32.pngSKIFF 发表于 2025-3-27 05:54:35
Torsion and Shear Effects,e on the section AA. In figure 4.1b it is assumed that the left-hand portion, X, has a convex surface so that the surface of the right-hand portion, Y, must be concave. This is not compatible as may easily be seen by rotating the left-hand portion through 180° about A-A to become Y’ (figure 4.1c). I联邦 发表于 2025-3-27 10:31:08
http://reply.papertrans.cn/89/8801/880058/880058_34.png滑动 发表于 2025-3-27 14:31:39
Virtual Work and Energy Methods,ng. We shall now investigate framed structures made up of a number of individual members that may either be pinned together at their ends or rigidly jointed. A number of ideas and methods will be presented that will enable the deflections of points on such structures to be found; or the forces may bdefeatist 发表于 2025-3-27 18:39:28
http://reply.papertrans.cn/89/8801/880058/880058_36.pngAnemia 发表于 2025-3-28 01:25:15
Stiffness and Flexibility Methods, develop these methods in more detail and apply them to specific problems. The solutions to the various problems will be set out in a manner that would be suitable for a computer application so that all the fundamental processes can be demonstrated. As the working will be done by hand it will be necFecundity 发表于 2025-3-28 02:54:02
http://reply.papertrans.cn/89/8801/880058/880058_38.pngslipped-disk 发表于 2025-3-28 08:40:52
Stability of Columns,ested in tension. An axial load is steadily applied and increased until the yield stress is approached. If a small lateral disturbing force were applied during the test the rod would bend slightly, but would return to the original straight state as soon as the lateral load is removed.阶层 发表于 2025-3-28 10:31:50
http://reply.papertrans.cn/89/8801/880058/880058_40.png