finite
发表于 2025-3-30 11:10:39
Impulse viscoelasticity: a new method to study polymerization of thermosets,l changes which occur during the solidification process. The technique is specifically applied to the curing of an epoxy resin. For such a system, the properties which can be measured as a function of the cure history are gelation time and temperature, equilibrium tensile modulus, cure stress and sh
革新
发表于 2025-3-30 16:12:37
Effect of crosslink type on the fracture of natural rubber vulcanizates,e ratio of sulfur to accelerator, the relative amounts of polysulfidic to monosulfidic crosslinks was controlled. Carbon-carbon crosslinking was introduced via peroxide cure. All elastomers tested were prepared at the same number average crosslink density as confirmed by equilibrium swelling and mod
agnostic
发表于 2025-3-30 17:48:27
http://reply.papertrans.cn/88/8800/879969/879969_53.png
Self-Help-Group
发表于 2025-3-30 20:55:19
http://reply.papertrans.cn/88/8800/879969/879969_54.png
Hemodialysis
发表于 2025-3-31 01:10:44
The three-dimensional stress field around a cylindrical inclusion in a plate of arbitrary thickness arbitrary thickness 2.. Both the plate and the inclusion are assumed to be of homogeneous and isotropic materials with different material properties. Perfect bonding is assumed to prevail at the interface. As to loading, a uniform tension is appliped in the plane of the plate at points remote from
Acetabulum
发表于 2025-3-31 05:15:56
The effect of damping on the spring-mass dynamic fracture model,that the energy release rate G could be computed for this dynamic situation by using the kinetic energy of the mass. The model has been particularly successful in describing dynamic effects in the Charpy impact test. This paper extends the model by including damping in parallel with the specimen sti
euphoria
发表于 2025-3-31 13:03:57
http://reply.papertrans.cn/88/8800/879969/879969_57.png
escalate
发表于 2025-3-31 13:25:02
http://reply.papertrans.cn/88/8800/879969/879969_58.png
–吃
发表于 2025-3-31 17:51:26
Time-dependent autohesion,fracture energy, ... Using the method of reduced variables, it was found that .. data as a function of contact time and temperature could be superposed into master curves of temperature-reduced contact times. Autohesion master curves developed in this fashion showed fracture resistance increasing wi