笨拙的你
发表于 2025-3-23 13:23:51
2191-530Xon linear-elastic analysis and provides programs to use for.Structural concrete designers nowadays distinguish between B-regions (named after Bernoulli beam theory) and D-regions (D standing for ‘disturbed’). They are all familiar with B-regions, but less acquainted with the expertise required for
外观
发表于 2025-3-23 15:55:34
http://reply.papertrans.cn/88/8798/879732/879732_12.png
里程碑
发表于 2025-3-23 19:38:18
http://reply.papertrans.cn/88/8798/879732/879732_13.png
FORGO
发表于 2025-3-24 00:49:28
http://reply.papertrans.cn/88/8798/879732/879732_14.png
Concerto
发表于 2025-3-24 03:54:20
http://reply.papertrans.cn/88/8798/879732/879732_15.png
RAGE
发表于 2025-3-24 07:27:14
http://reply.papertrans.cn/88/8798/879732/879732_16.png
善变
发表于 2025-3-24 13:48:20
http://reply.papertrans.cn/88/8798/879732/879732_17.png
整理
发表于 2025-3-24 16:34:02
http://reply.papertrans.cn/88/8798/879732/879732_18.png
Rodent
发表于 2025-3-24 19:11:01
Introduction to Stringer-Panel Models,li beam theory does not apply. To explain the merits of the SPM, first an overview of the STM is presented, setting out its design steps and challenges. The SPM applies two different elements: stringers to carry normal forces, and panels for the transmission of uniform shear membrane forces. The SPM
拉开这车床
发表于 2025-3-25 01:03:26
Dapped Beam, of stringers and panels is explained and the equilibrating loading on the D-region is derived. The loading due to the beam on the D-region consists of a uniformly distributed vertical shear force, a horizontal compressive force on the upper stringer, and a horizontal tensile force on the lower stri