音乐戏剧
发表于 2025-3-25 06:16:04
http://reply.papertrans.cn/88/8787/878617/878617_21.png
STALL
发表于 2025-3-25 09:19:07
Conference proceedings 2023oncrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subj
Sinus-Node
发表于 2025-3-25 15:40:30
http://reply.papertrans.cn/88/8787/878617/878617_23.png
Esalate
发表于 2025-3-25 19:41:38
Engineered Geopolymer Composites (EGC) with Ultra-high Strength and Ductilityeopolymer matrix were looser than those with lower FA/GGBS ratios. The findings arising from this study provided a sound basis for developing EGC materials with ultra-high mechanical properties for sustainable and resilient infrastructure.
armistice
发表于 2025-3-25 23:35:49
http://reply.papertrans.cn/88/8787/878617/878617_25.png
套索
发表于 2025-3-26 03:42:14
http://reply.papertrans.cn/88/8787/878617/878617_26.png
carbohydrate
发表于 2025-3-26 07:29:22
The Use of Strain Hardening Natural Fabric Reinforced Cement Based Composite Systems for Structural erial for RC structural beams. The beams were strengthened for flexural and shear. Both externally reinforced specimens presented an increase in loading capacity and deflection decrease compared to their respective references, which was associated with a yielding delay on the rebars in a range between 21% to 34%.
ADORN
发表于 2025-3-26 10:25:54
Pull-Out Behavior of Single Fiber Embedded in Porosity Free Concrete(PFC)oftening behavior after the maximum load, whereas stainless fibers showed yielding behavior that caused displacement while maintaining the load. It seems that the stainless fiber has good bonding with the ultra-high strength matrix.
CERE
发表于 2025-3-26 14:56:42
Mechanical Performance of Strain Hardening Limestone Calcined Clay Cementitious Composites (SHLC4) Ssites (SHCC) made of limestone calcined clay cement (LC3) and high-performance polyethylene (PE) fibers. Specimens for uniaxial tension tests were produced with 2 vol.% fiber content and preloaded until 1% strain at the age of 28 days. Subsequently, the specimens were weekly exposed to three days of
声明
发表于 2025-3-26 16:59:20
The Use of Ultra-high Volume of Lime Stone Calcine Clay to Produce Basalt Fiber Reinforced Strain Hathe material is suddenly overloaded, the structure may still be functional. One of the major component which drives the hardening behavior of the material is the fiber. The problems with polymer fibers which is the commonly used for making SHCCs is that they have a low melting point. Unlike polymer