LINE
发表于 2025-3-25 03:46:37
Dowel Anchorage,gth capacity or pull-out strength capacity are provided, taking into consideration stress concentrations either in the mid-span or in the support region..A formula to find maximum sag due to deformation under gravity load is presented..An application example to determine minimum thickness is presented for common and several slabs dimensions.
闷热
发表于 2025-3-25 09:01:08
http://reply.papertrans.cn/88/8784/878363/878363_22.png
orthopedist
发表于 2025-3-25 15:10:10
http://reply.papertrans.cn/88/8784/878363/878363_23.png
挫败
发表于 2025-3-25 17:37:46
Natural Stone Characterization,ements, so that the main relevant standards are referred..The use of natural stone as cladding material is discussed upon its physical and mechanical properties obtained in test characterization. Surfaces finish briefly are discussed considering inherent alterations on them.
licence
发表于 2025-3-25 20:39:57
Limit States Design,oposed depending on the types and on the coefficients of variation of the distributions of resistances. Their values are determined using structural reliability analysis for the load and resistance factor design format..An application example is used to illustrate both methods, and conclusions are drawn.
SUE
发表于 2025-3-26 02:27:31
Undercut Anchorage,uced in the support region through formulae derivation calibrated by experimental studies and finite element method..A formula to find maximum sag due to deformation under gravity loads is also presented..An application example to determine minimum thickness is presented for common and several slabs’ dimensions and results are discussed.
尽忠
发表于 2025-3-26 04:49:56
http://reply.papertrans.cn/88/8784/878363/878363_27.png
汇总
发表于 2025-3-26 11:24:22
http://reply.papertrans.cn/88/8784/878363/878363_28.png
其他
发表于 2025-3-26 13:51:51
Book 2014ethod (FEM) for the most commonly used modern anchorage systems. Calculation examples allow designers to solve several anchorage engineering problems in a detailed and objective manner, underlining the key parameters. The design of the anchorage metal parts, either in stainless steel or aluminum, is also presented..
Fermentation
发表于 2025-3-26 16:58:31
http://reply.papertrans.cn/88/8784/878363/878363_30.png