pus840
发表于 2025-3-23 12:53:41
Vladimir Norkinospital in determining its Poka-Yoke readiness and contribute towards improving value generation by increasing patient safety, staff, and patient happiness, promoting productivity, and reducing costs. This review provides researchers with future directions to further explore lacunae in the present l
小淡水鱼
发表于 2025-3-23 16:16:33
B. T. Polyakse of the problem. The process yield increased to 99.10 from 97.33% in six months by using this approach. This study begins with the identification of causes through cause and effect diagram (C and E diagram) and root cause analysis of defective products. This objective of this paper is to present a
皱痕
发表于 2025-3-23 20:52:08
Rüdiger Schultzempt was made to address the problem of non-uniform regression rates in this study. The aim is to study the effect of the vortex injector on the uniformity of the regression rate. PVC-based fuel pellets are used with three different injector configurations. A total of nine ignition static tests were
Cumbersome
发表于 2025-3-24 02:13:47
http://reply.papertrans.cn/88/8782/878149/878149_14.png
饶舌的人
发表于 2025-3-24 03:17:34
http://reply.papertrans.cn/88/8782/878149/878149_15.png
HACK
发表于 2025-3-24 09:47:59
K.-J. Böttcherthe initial values of the process parameters (concentration 2 g/l, gap voltage 30 V and pulse on-time 50 µs) provided lower TWR. It is recommended that pungai oil dielectric be employed as a replacement for hydrocarbon oil-based dielectrics for the green EDMing process.
一加就喷出
发表于 2025-3-24 12:55:14
István Deákting the pallet from the pallet station to the machining table. By merging the movement along the .-axis of the pallet with the movement along the .-axis of the machining table, this system removes the requirement for .-axis movement. The pallet is pushed or pulled into the pallet station by a kinem
跑过
发表于 2025-3-24 15:42:22
http://reply.papertrans.cn/88/8782/878149/878149_18.png
anatomical
发表于 2025-3-24 21:57:56
http://reply.papertrans.cn/88/8782/878149/878149_19.png
Accrue
发表于 2025-3-24 23:32:59
Position and Controller Optimization for Robotic Parts Matingwith a PUMA 562 manipulator. The expected advantage in industrial applications is a comparatively easy implementation, because performance can be improved by simply adjusting ’external’ parameters as mating position and coefficients of the standard joint controller. Particularly, no modifications of