extinct
发表于 2025-3-23 10:27:15
Harry M. Markowitz,Erik L. van Dijkurface node while SiO. precipitate over a large region (up to 0.98 µm depth). Parabolic growth followed by linear growth has been observed from the TGA graphs. With increasing temperature, parabolic region decreased and linear growth dominates. Top surface morphology of the oxidised sample changes w
visceral-fat
发表于 2025-3-23 14:42:36
Hiroshi Konnoknow the best levels for each process parameter. Analysis of variance is performed to find out the contribution of each process parameter toward the different tool wears. From the analysis of variance, it is found that irrespective of the wear associated with the tool electrode, the current is the m
分开
发表于 2025-3-23 18:59:43
http://reply.papertrans.cn/88/8782/878146/878146_13.png
恸哭
发表于 2025-3-23 23:21:21
Leonard C. MacLean,Yonggan Zhao,William T. Ziembathe experiments performed, it has been found that for a filament size of 1.6 mm, a perforated substrate with 1.8 mm hole size at equal spacing is suitable for the initial layer adhesion in an extrusion-based metal wire additive manufacturing system using induction heating.
Judicious
发表于 2025-3-24 03:55:50
Julia L. Higle,Karl G. Kempfite-TangoPlus provides the optimum build properties. Material combination is the most dominant factor, followed by finish type and geometric design. Furthermore, printing time and consumption of support material are higher in VeroClear material when compared to other materials. The result of this st
美色花钱
发表于 2025-3-24 09:37:21
http://reply.papertrans.cn/88/8782/878146/878146_16.png
adumbrate
发表于 2025-3-24 12:23:42
Jiarui Han,Benjamin Van Roymposite reinforced with 1 wt% ZrO. is 18.6% more than the base alloy. The compression strength is increased in A6082 alloy reinforced with 1 wt% SiC and 1 wt% ZrO., which is 20% more than the A6082 base alloy. The Charpy impact strength of the composite materials is increased with the addition of 1
相同
发表于 2025-3-24 17:01:35
http://reply.papertrans.cn/88/8782/878146/878146_18.png
modish
发表于 2025-3-24 22:24:35
Book 2011er for the volume. Unfortunately, to the great loss of all of us, George Dantzig passed away on May 13, 2005. Encouraged by many colleagues, I decided to continue with the book and edit it as a volume dedicated to George Dantzig. Management Science published in 2005 a special volume featuring the “T
enhance
发表于 2025-3-25 01:03:23
0884-8289 ay on May 13, 2005. Encouraged by many colleagues, I decided to continue with the book and edit it as a volume dedicated to George Dantzig. Management Science published in 2005 a special volume featuring the “T978-1-4614-2762-9978-1-4419-1642-6Series ISSN 0884-8289 Series E-ISSN 2214-7934