人充满活力
发表于 2025-3-26 21:29:54
http://reply.papertrans.cn/88/8753/875259/875259_31.png
Ingrained
发表于 2025-3-27 03:19:28
http://reply.papertrans.cn/88/8753/875259/875259_32.png
intricacy
发表于 2025-3-27 06:47:39
http://reply.papertrans.cn/88/8753/875259/875259_33.png
哭得清醒了
发表于 2025-3-27 10:54:46
Inelastic Buckling of Structures,e. the stress in the structure does not exceed the . in compression and the member undergoes configuration or shape failure. For many real structures the elastic analysis results in flexural buckling load estimation that exceeds the one associated with the yield stress or .of the material. This is e
有角
发表于 2025-3-27 15:00:40
Structural Design for Stability of Members, of structural analysis using acceptable . such as allowable stress, ultimate strength, maximum deformation, stiffness or stability etc. For the stress or strength and deformation the design procedures are straight forward which ensure the realization of a particular desired state for given loading.
扩张
发表于 2025-3-27 19:27:25
http://reply.papertrans.cn/88/8753/875259/875259_36.png
改变立场
发表于 2025-3-27 22:02:00
Introduction,s, imperfections, inhomogeneities or irregularities do not cause the system to depart excessively from that state. The usual test is to impart a small disturbance to the existing state of the system, if the system returns back to its original undisturbed state when the cause of disturbance is removed, the system is said to be stable.
范围广
发表于 2025-3-28 02:16:00
Structural Design for Stability of Members,he given loading. In the other words a . has to be provided. When buckling is a controlling factor, the problem can be handled by adding supporting or bracing members or a sufficiently large cross-section can be selected thereby eliminating buckling as a real problem. The choice will be governed by economy and practicality of the solution.
邪恶的你
发表于 2025-3-28 08:43:36
Stability Analysis of Arches, Rings and Shells,and the solution can be obtained in a simple manner by using corresponding differential equations e. g. for a circular curve, this situation is realized for a uniform pressure normal to the axis i.e. radial pressure. The following analysis of a flat arch may serve as simple illustration.
多嘴
发表于 2025-3-28 14:23:13
http://reply.papertrans.cn/88/8753/875259/875259_40.png