incisive
发表于 2025-3-26 21:11:57
http://reply.papertrans.cn/88/8751/875072/875072_31.png
ATP861
发表于 2025-3-27 01:37:04
Raimund Schwendneruld be significantly enhanced by further quantitative investigation of heat flow in AFM probes, high-resolution temperature calibration, temperature determination at tip-substrate contacts, and possibly standardization of these across heated AFM cantilever probe types.
浸软
发表于 2025-3-27 07:24:45
http://reply.papertrans.cn/88/8751/875072/875072_33.png
Hot-Flash
发表于 2025-3-27 09:46:14
http://reply.papertrans.cn/88/8751/875072/875072_34.png
Albinism
发表于 2025-3-27 16:53:03
High-Rate Laser Processing of Metals Using High-Average Power Ultrashort Pulse Lasersd micro cavities are evaluated by means of surface roughness measurements and SEM micrograph analysis. As a result, the mid-fluence range between 0.4 and 1.5 J/cm. is identified for ultrashort pulses as most suitable processing regime for micro fabrication with regard to removal efficiency, throughput, and machining quality.
铺子
发表于 2025-3-27 18:10:05
http://reply.papertrans.cn/88/8751/875072/875072_36.png
Obloquy
发表于 2025-3-28 01:07:05
http://reply.papertrans.cn/88/8751/875072/875072_37.png
Benign
发表于 2025-3-28 02:46:23
http://reply.papertrans.cn/88/8751/875072/875072_38.png