Venules
发表于 2025-3-23 12:54:37
http://reply.papertrans.cn/88/8750/874997/874997_11.png
意见一致
发表于 2025-3-23 13:54:01
http://reply.papertrans.cn/88/8750/874997/874997_12.png
Mucosa
发表于 2025-3-23 20:50:36
Mechanics study of mechanics in the two categories of ., (or simply .) and .. The first section deals with statics and addresses stationary objects. Statics is based on a reduction of Newton‘s second law (. = .) and the equivalent equation describing rotational motion for the special case where the acceler
变态
发表于 2025-3-23 22:20:35
http://reply.papertrans.cn/88/8750/874997/874997_14.png
MUT
发表于 2025-3-24 03:18:36
Mechanical Propertiesis section, the different available and standardized methods are further subdivided into quasistatic and dynamic testing methods. The former include, e. g., tensile and hardness testing, while the latter focus on impact and cyclic testing, including linear elastic fracture mechanics. Section 5.2 int
交响乐
发表于 2025-3-24 07:19:06
http://reply.papertrans.cn/88/8750/874997/874997_16.png
Indict
发表于 2025-3-24 13:50:57
Nondestructive Inspection (NDI) indenting, extracting samples, reducing its service capabilities or destroying it. The following chapter describes principles of NDI. Subsequently, NDI methods will be classified into seven categories namely, acoustic, potential drop, magnetic, electromagnetic, thermography, optical, and radiation
骚动
发表于 2025-3-24 18:19:25
http://reply.papertrans.cn/88/8750/874997/874997_18.png
走路左晃右晃
发表于 2025-3-24 22:59:37
Tribology on structure, real contact geometry, tribological loads, operating and loss variables are provided. Concerning friction, the different friction types, states and mechanisms are discussed. In the sections on wear a lot of details on types and mechanisms of wear, wear profiles and the determination o
注意到
发表于 2025-3-25 02:10:28
http://reply.papertrans.cn/88/8750/874997/874997_20.png