Dappled
发表于 2025-3-25 05:12:43
http://reply.papertrans.cn/88/8723/872201/872201_21.png
Verify
发表于 2025-3-25 08:06:25
http://reply.papertrans.cn/88/8723/872201/872201_22.png
Pedagogy
发表于 2025-3-25 15:19:39
http://reply.papertrans.cn/88/8723/872201/872201_23.png
领先
发表于 2025-3-25 17:52:09
http://reply.papertrans.cn/88/8723/872201/872201_24.png
Popcorn
发表于 2025-3-25 20:33:31
http://reply.papertrans.cn/88/8723/872201/872201_25.png
出价
发表于 2025-3-26 02:18:28
http://reply.papertrans.cn/88/8723/872201/872201_26.png
Stress-Fracture
发表于 2025-3-26 05:17:13
the effect of their parameters and the effect of the laser re-melting on the surface quality. Next, it is followed by a number of surface finishing techniques such as laser polishing, chemical and electropolishing. Experimental results of post-surface finishing of AM parts by microelectrical discha
Sinus-Rhythm
发表于 2025-3-26 09:02:39
Claus von Kutzschenbachomponent characteristics required for each photoresist. This chapter explains the role of oxygen, photoinitiator, free radical formation and exposure time in photoresist. Review of the various assisted processes of PCM such as magnetic field-assisted PCM and ultrasonic-assisted PCM is discussed.
Latency
发表于 2025-3-26 14:22:46
http://reply.papertrans.cn/88/8723/872201/872201_29.png
PAGAN
发表于 2025-3-26 20:38:17
Claus von Kutzschenbachng not only for the fabrication of piezoceramic MEMS but also for the Nondestructive Evaluation (NDE) of metals and composites in guided wave-based real-time Structural Health Monitoring (SHM). This chapter presents the development of application-specific in situ piezoeceramic coating and the techni