滔滔不绝地讲
发表于 2025-3-23 12:04:19
Scripting,e some of the common mistakes that automation engineers produce in their work, and ways to avoid those mistakes. Some tips in this chapter are common for both automation and development, while others are specific for testing automation only.
Tempor
发表于 2025-3-23 14:36:25
http://reply.papertrans.cn/88/8711/871059/871059_12.png
Mumble
发表于 2025-3-23 19:08:00
Reviewing,ewed, not depending on how many years you have been working in the project or how much experience you have gotten. This chapter describes several cases when it is important to review or optimize your tests, or vice versa – when it is better to do nothing instead.
我说不重要
发表于 2025-3-24 00:26:13
e ratio has, consequently, been underestimated by 10–30 dB in most 2D model calculations. By using the correct definition we have reached good agreement between measurement results (Rhode 1971; Johnstone and Yates 1974) and 2D model results as regards both amplitude and phase.
GET
发表于 2025-3-24 02:54:34
Gennadiy Alpaev or completely open/close. The punch slowly moves along the surface. The elastic materials of the coatings and the substrate are homogeneous but different and coatings are firmly bonded between each other and to the substrate. The second part of the paper considers how initial statistical distributi
借喻
发表于 2025-3-24 10:12:31
Gennadiy Alpaevith a length of 0.1–1 mm, a diameter that, as a rule, does not exceed one-tenth of their length, and a volume content of fibres of 15–45%) have been widely used in modern engineering. A great quantity of thin-walled structural elements operating under loads is manufactured by injection moulding. Ele
勉励
发表于 2025-3-24 13:11:53
Gennadiy Alpaevts. A sensory system must provide information about contact force, friction, and roughness, all of which are helpful for identifying objects. Moreover, during stable grasping, a sensory system must be able to recognize incipient and overt slips between the touching system and the object.
惹人反感
发表于 2025-3-24 18:27:51
http://reply.papertrans.cn/88/8711/871059/871059_18.png
Heretical
发表于 2025-3-24 22:33:29
http://reply.papertrans.cn/88/8711/871059/871059_19.png
想象
发表于 2025-3-25 01:13:36
s sensor while varying the load and stretching force, to fully understand its response and determine its degree of flexibility and stretchability. We found that a Discrete Wavelet Transformation (DWT) may be used to indicate stick/slip states while the sensor is sliding over surfaces. This method wa