讨好美人
发表于 2025-3-23 13:06:38
Bifilms and Hot Tearing of Al-Si AlloysA356, A380 and A413 alloys were cast in two different moulds to investigate the hot tearing tendency with regard to the melt quality. It was found that bifilms had dominant effect over the hot tearing.
反复拉紧
发表于 2025-3-23 16:36:39
http://reply.papertrans.cn/87/8664/866348/866348_12.png
altruism
发表于 2025-3-23 18:22:19
http://reply.papertrans.cn/87/8664/866348/866348_13.png
inchoate
发表于 2025-3-24 00:20:01
On the Relationship between Quality Index and Fatigue Life Distributions in B201 and D357 Alloy Aerotion of the elongation (quality index) distribution in a region where premature fracture is caused by old oxides and pores, providing further evidence about the relationship between elongation and fatigue performance.
foliage
发表于 2025-3-24 03:26:14
http://reply.papertrans.cn/87/8664/866348/866348_15.png
URN
发表于 2025-3-24 07:51:36
http://reply.papertrans.cn/87/8664/866348/866348_16.png
evanescent
发表于 2025-3-24 12:31:31
http://reply.papertrans.cn/87/8664/866348/866348_17.png
occult
发表于 2025-3-24 17:31:55
The Unidirectional Solidification of Ti-46Al-8Nb Alloy with BaZrO3 Coated Al2O3 Moulding rates (120 μm/s), and the metal-BaZrO. interface, microstructure and chemical composition of the alloy are evaluated. The result demonstrates that after the directional solidification a fully lamellar γ/α. microstructure without BaZrO. particles contamination is observed, and the BaZrO. protecti
整体
发表于 2025-3-24 19:08:45
http://reply.papertrans.cn/87/8664/866348/866348_19.png
integrated
发表于 2025-3-25 02:43:22
http://reply.papertrans.cn/87/8664/866348/866348_20.png