manifestation
发表于 2025-3-30 10:14:14
http://reply.papertrans.cn/87/8653/865216/865216_51.png
Reservation
发表于 2025-3-30 14:41:27
http://reply.papertrans.cn/87/8653/865216/865216_52.png
漂亮
发表于 2025-3-30 18:17:55
Piezopolymer Interdigital Transducers for a Structural Health Monitoring Systemlike biological receptors on the human body, achieved good and promising results showing broad-based economic benefits. There are a few who demonstrated SHM systems based on the use of a network of piezoceramic sensors applied directly to the structure for monitoring and surveying, controlled by a d
preservative
发表于 2025-3-31 00:46:50
http://reply.papertrans.cn/87/8653/865216/865216_54.png
最初
发表于 2025-3-31 03:04:34
http://reply.papertrans.cn/87/8653/865216/865216_55.png
anaerobic
发表于 2025-3-31 07:15:34
Thermally Actuated Microfluidic System for Polymerase Chain Reaction Applicationsoxide heaters on a 5 × 5 cm. microscope glass slide is presented. The microfluidic structure comprises a channel for the fluid handling and a reaction chamber for the polymerase chain reaction (PCR). Two lateral heaters, located at the inlet and outlet positions of the chamber, actuate the valves an
Influx
发表于 2025-3-31 09:50:16
http://reply.papertrans.cn/87/8653/865216/865216_57.png
人类学家
发表于 2025-3-31 16:06:20
http://reply.papertrans.cn/87/8653/865216/865216_58.png
以烟熏消毒
发表于 2025-3-31 18:34:53
Localization, Recognition, and Classification of a Superficial Seismic Source in an Inhomogeneous Mealization is based on the DOA (Direction of Arrival) and on RSSR (Received Signal Strength Ratio) algorithms applied after Love and Rayleigh superficial wave separation. Recognition and classification methods make use of PCA (Principal Component Analysis) and K-means algorithm. The efficiency of thi
产生
发表于 2025-4-1 01:16:06
Design and Fabrication of a Compact ,–, Probe for Acoustic Impedance Measurementocity sensor, a commercial microphone, and an electronic read-out interface. The velocity sensor consists of two integrated polysilicon heaters placed over suspended dielectric membranes. The sensor has been designed with a commercial CMOS process and fabricated using a simple post-processing techni