杠杆支点
发表于 2025-3-26 23:27:09
http://reply.papertrans.cn/87/8643/864250/864250_31.png
使混合
发表于 2025-3-27 02:03:07
http://reply.papertrans.cn/87/8643/864250/864250_32.png
dry-eye
发表于 2025-3-27 08:00:58
,μEDM Machining of ZrB2-Based Ceramics Reinforced with SiC Fibres or Whiskers, performed by recording pulses data by means of an oscilloscope, while the surface characteristics were defined by a 3D reconstruction. The results indicated how reinforcement shapes affect the energy efficiency of the process and change the surface aspect.
FECK
发表于 2025-3-27 10:22:27
Surface Modifications Induced by Roller Burnishing of , Under Different Cooling/Lubrication Conditithe process to significantly improve the above performance especially when cryogenic cooling is applied. Finally, the extensive experimental activity allowed to find a combination of processing parameters and lubrication conditions able to significantly improve the surface quality of the final component.
Resign
发表于 2025-3-27 15:39:17
http://reply.papertrans.cn/87/8643/864250/864250_35.png
刺耳的声音
发表于 2025-3-27 19:10:47
Micro-milling of Selective Laser Melted Stainless Steel,material removal behaviour during micro-milling operations for the selection of the optimal feed rate value was performed on 17-4 PH additive manufactured samples studying the variation of the specific cutting force as a function of the feed per tooth. The transition from shearing to ploughing regim
adroit
发表于 2025-3-28 01:16:05
http://reply.papertrans.cn/87/8643/864250/864250_37.png
diathermy
发表于 2025-3-28 05:22:43
http://reply.papertrans.cn/87/8643/864250/864250_38.png
推延
发表于 2025-3-28 09:34:55
Energy Efficient State Control of Machine Tool Components: A Multi-sleep Control Policy, is required before resuming the service; thus, to switch off/on the machine might be not advantageous. This paper analyzes a time-based threshold policy that disables/enables machine components with separated control commands instead of controlling the whole machine simultaneously. According to the
urethritis
发表于 2025-3-28 11:02:29
,μEDM Machining of ZrB2-Based Ceramics Reinforced with SiC Fibres or Whiskers,for Ultra-High Temperature Ceramics based on zirconium diboride (ZrB.) doped by SiC. Two reinforcement shapes, namely SiC short fibres and SiC whiskers were selected in accordance with their potential effects on mechanical properties and oxidation performances. Specific sets of process parameters we