abysmal
发表于 2025-3-28 18:22:16
Numerical and Experimental Study of Porosity Evolution during Plasma Spray Deposition of W,ty of the sprayed material. In the present paper, numerical and experimental studies on porosity evolution in plasma spray deposition of W are undertaken to provide insight into the formation and evolution of porosity. In the numerical study, deformation, interaction and solidification of molten dro
POWER
发表于 2025-3-28 20:13:16
http://reply.papertrans.cn/87/8626/862550/862550_42.png
下级
发表于 2025-3-29 01:48:52
http://reply.papertrans.cn/87/8626/862550/862550_43.png
Dislocation
发表于 2025-3-29 04:00:17
Microstructure and Mechanical Properties of Alloys and Metal Matrix Composites (MMCs) Processed by y reviewed. We have established a spray forming facility recently, and the microstructure and mechanical properties of several alloys (including Ni.Al-base alloys and high speed steels) and particulate reinforced metal matrix composites (MMCs) (including aluminium alloy 2618+SiCp and maraging steel+
construct
发表于 2025-3-29 09:24:09
http://reply.papertrans.cn/87/8626/862550/862550_45.png
神圣将军
发表于 2025-3-29 15:14:06
A Perspective on the High Resistance to Coarsening and Durability of Silicide Dispersions in RSPM Aning if they are to compete with Ti..The α-silicide phase in rapidly solidified Al-Fe-V-Si alloys appears to meet these requirements and the present study is involved with developing an understanding of the mechanisms behind this stability..While the phase is stable at the highest expected service t
注意到
发表于 2025-3-29 17:29:22
http://reply.papertrans.cn/87/8626/862550/862550_47.png
内阁
发表于 2025-3-29 21:09:49
Thixoforming of Spray Cast Materials,processing provides several advantages over conventional casting, forging, and P/M techniques, but has not been accepted widely. Problems related to the methods for producing non-dendritic thixoworkable microstructures, and to process design and control must be addressed. In order to evaluate and ch
Encoding
发表于 2025-3-30 01:07:34
High Temperature Deformation of Rapidly Solidified 7091 P/M Aluminum Alloy,e change and constant crosshead speed tensile tests. The alloy exhibited a maximum strain rate sensitivity of 0.3 and 190. elongation despite its initial fine grain size of 2 .m. This relatively low ductility is attributed to partially recrystallized microstructure and preferential distribution of f
背信
发表于 2025-3-30 05:56:55
Microstructures, Tensile Properties and Fatigue Crack Growth Behavior of the Zirconium Modified 202 Three concentrations of zirconium (0.12, 0.28 and 0.53 wt%) were selected to examine the effect of zirconium on the microstructures, tensile properties and fatigue crack growth behavior of the modified 2024 alloys. The results show that all as-spray deposited materials have acceptable densities (91