JEER
发表于 2025-3-28 16:01:25
http://reply.papertrans.cn/84/8319/831830/831830_41.png
伪善
发表于 2025-3-28 18:54:22
http://reply.papertrans.cn/84/8319/831830/831830_42.png
努力赶上
发表于 2025-3-29 00:29:40
http://reply.papertrans.cn/84/8319/831830/831830_43.png
条约
发表于 2025-3-29 03:07:21
http://reply.papertrans.cn/84/8319/831830/831830_44.png
弄污
发表于 2025-3-29 09:15:50
Remote Detection of Abnormal Behavior in Mechanical Systems,ishment of fault feature observability as a function of sensor location relative to operating equipment. In this study, the procedure used for fault detection consists of the following: (1) collect signals for rotating machinery operating in a healthy, faulty, and off state (2) identify features tha
JIBE
发表于 2025-3-29 15:25:09
Mapping Motion-Magnified Videos to Operating Deflection Shape Vectors Using Particle Filters,ning them to specific feature points in the in the motion-magnified sequence of images. This study shows that the cluster centers can be employed to estimate the ODS vectors, and the performance of the proposed methodology is evaluated experimentally on a lab-scale cantilever beam and validated via
lipids
发表于 2025-3-29 16:15:43
http://reply.papertrans.cn/84/8319/831830/831830_47.png
任命
发表于 2025-3-29 20:24:26
http://reply.papertrans.cn/84/8319/831830/831830_48.png
轻而薄
发表于 2025-3-30 00:12:06
Full Field Strain Measurements Using 3D Laser Vibrometry, more traditional, reliable strain measurement techniques. This paper will be comparing the results of the 3D laser vibrometry system’s strain measurements using several different surface treatments at several different temperatures to measurements obtained from traditional foil strain gages.
PACT
发表于 2025-3-30 07:41:23
Output-Only Modal Parameter Estimation Using a Continuously Scanning Laser Doppler Vibrometer Systeethod are: (1) modal damping ratios and mode shapes can be accurately estimated from obtained free response shapes, (2) the scanning frequency of the CSLDV system can be relatively low, and (3) estimated mode shapes can be used for structural damage identification as if they were measured by stepped