改进
发表于 2025-3-28 17:54:42
Solderless Prototyping,Sandwich, the line-following robot, has a fairly simple circuit. Even so, at least 30 or 40 electrical connections need to be made. Consider what you have planned for your ultimate robot and you’ll see that alligator clips are not going to be sufficient. In this chapter, you’ll learn about a popular technology for experimenting.
Pander
发表于 2025-3-28 19:32:03
Solderless Breadboard Setup,You’ll install a battery, power switch, and an LED power indicator. You can use this basic setup over and over again for trying out robot circuits and modules.
pacific
发表于 2025-3-29 02:03:01
http://reply.papertrans.cn/84/8311/831031/831031_43.png
冥想后
发表于 2025-3-29 05:36:35
http://reply.papertrans.cn/84/8311/831031/831031_44.png
先驱
发表于 2025-3-29 08:52:37
Transistor Switches,When a chip pin provides current like the positive terminal of a battery, it is said to “source” current. When a chip pin receives current like the negative terminal of a battery, it is said to “sink” current. These terms are reminiscent of the water analogy, where water comes out of the source and then goes into the sink.
NOTCH
发表于 2025-3-29 15:21:16
DC Motors,Motion is one of the primary differentiators between a robot and a computer.
压迫
发表于 2025-3-29 18:50:50
Adding Gearhead Motors,In this chapter, we will select and install motors in the line-following robot circuit. You’ll also learn a little about diodes.
obsolete
发表于 2025-3-29 20:34:54
Wheels,At this point, you have some wonderful motors that are only spinning themselves. In this chapter, you’ll be introduced to a variety of wheels and some criteria to aid you in selecting a pair of wheels for the line-following robot.
Palpable
发表于 2025-3-30 02:11:30
http://reply.papertrans.cn/84/8311/831031/831031_49.png
negligence
发表于 2025-3-30 05:31:26
http://image.papertrans.cn/r/image/831031.jpg