Halfhearted
发表于 2025-3-27 00:05:43
http://reply.papertrans.cn/84/8301/830017/830017_31.png
固定某物
发表于 2025-3-27 04:21:07
Elastic Gel Birefringence Method as Applied to the Stress Analysis of Hole Pressure Errorrmed under static load, I presented a paper in 1975 informing the following concept: The same distributions of the relative deviatoric stress intensity and direction as a polymer melt shows will be generated by a deformation of an elastic gel in case its selection is appropriate with respect to its
EVADE
发表于 2025-3-27 07:53:35
http://reply.papertrans.cn/84/8301/830017/830017_33.png
GIDDY
发表于 2025-3-27 10:06:40
http://reply.papertrans.cn/84/8301/830017/830017_34.png
conformity
发表于 2025-3-27 17:14:48
http://reply.papertrans.cn/84/8301/830017/830017_35.png
Neolithic
发表于 2025-3-27 19:36:07
Experimental Studies of Heat Transfer in Viscoelastic Flow Through Pipes. Applications to Solar Enerary flows appear in the cross-section of the pipe. These secondary flows have a strong effect upon the flow characteristics but do not influence appreciably the rate of flow through the pipe. (1). Nevertheless it has been shown that the secondary flows improve substantially the heat transfer propert
Sad570
发表于 2025-3-28 01:34:21
Book 1980buted to all participants at the time of the Congress. Although of course we Italians would be foolish to even try to emulate our Swedish friends as far as efficiency of organization is concerned, we decided at the very beginning that, as far as the Proceedings were concerned, the VIIIth Internation
退潮
发表于 2025-3-28 03:54:57
An Experimental Investigation of Flow in the Die Land Region of a Capillary Rheometerfects. At higher flow rates, the axial velocity distribution becomes asymmetric followed by the development of instability. Under unstable flow conditions, the velocity at the wall of the die is non-zero indicating a slip flow, in addition.
Console
发表于 2025-3-28 09:53:57
http://reply.papertrans.cn/84/8301/830017/830017_39.png
缺乏
发表于 2025-3-28 14:11:54
Kitaro Adachi,Kazuhiro Kawai,Naoya Yoshioka ist aber „Bedarf“ ein unklarer Begriff, der meist im Sinne des „Minimalbedarfs“ verwendet wird, also die Menge an einem Stoff angibt, die gerade reicht, um Schäden zu vermeiden. Der Bedarf variiert mit dem Kriterium, das man als Maßstab anlegt (z.B. verschiedene klinisch-chemische Parameter, Wachst