acrimony
发表于 2025-3-25 05:05:28
http://reply.papertrans.cn/83/8286/828578/828578_21.png
天真
发表于 2025-3-25 09:41:10
http://reply.papertrans.cn/83/8286/828578/828578_22.png
ECG769
发表于 2025-3-25 12:47:34
http://reply.papertrans.cn/83/8286/828578/828578_23.png
替代品
发表于 2025-3-25 19:06:19
Pre-treatment of Waste Copper Dust (I): Potential of Oxidative Roasting–Density Separation–Sulphuricased by 280% and 400% when WCD was pre-treated with OR and DS, respectively. Furthermore, DS pre-treated particles revealed enhanced micro-porosities in form of peels and cracks. Significant amounts of gangue minerals (e.g. aluminium and silicon) reported to the tailings, presupposing reduced SR and
OREX
发表于 2025-3-25 21:57:31
http://reply.papertrans.cn/83/8286/828578/828578_25.png
的是兄弟
发表于 2025-3-26 00:33:47
http://reply.papertrans.cn/83/8286/828578/828578_26.png
名字
发表于 2025-3-26 07:18:30
Extraction of Copper Oxide (II): Copper Oxide Nanoparticles was then thermally decomposed at various temperatures (650, 750, and 850 °C) and times (1, 2, 3 h). The obtained results demonstrated that angular to spherical CuO-NPs with a mean diameter of 35 ± 5 nm were successfully synthesized using a thermal decomposition approach at optimal conditions (coppe
hieroglyphic
发表于 2025-3-26 10:57:23
Thermal and Mechanical Properties (I): Optimum Predictive Thermal Conduction Model Development for Ee density separation of waste copper dust. The different CuO-NP compositions will be employed as fillers in an epoxy matrix to produce organic-inorganic composite coatings. To better understand the heat resistance at the interfaces (i.e., interface thermal resistance) between fillers and between fil
季雨
发表于 2025-3-26 12:43:51
Thermal and Mechanical Properties (II): Spark Plasma Sintered Ti–6Al–4V Alloy Reinforced with Mullitinitial sample preparation, process optimization, an analysis of the impact of compositional variation on the thermal and wear properties of SPS-fabricated Ti-6Al-4V+MRT composites, creation of the best possible predictive model, and finally experimental validation/process simulation will be used to
喷出
发表于 2025-3-26 17:00:21
Wave Energy Converter Design: Seawater Integrity and Durability of Epoxy Resin-Filled Corrosive Micr fillers is therefore praiseworthy. However, in order to get the desired performance, the surface of the filler particles must be altered because epoxy resins and fillers are not always compatible. WCD cannot be used as epoxy fillers because, although being quick and simple, the physical and chemica