节省
发表于 2025-3-27 00:29:36
http://reply.papertrans.cn/83/8279/827862/827862_31.png
罐里有戒指
发表于 2025-3-27 05:02:19
http://reply.papertrans.cn/83/8279/827862/827862_32.png
Cuisine
发表于 2025-3-27 06:31:29
Xiaoqiang Tang,Zhufeng Shao,Rui Yaos context, it is to be expected that no major hindering forces will block a more progressive route. It is argued that a more comprehensive, inter-sectoral and well-articulated approach is needed to ensure not only more satisfactory numbers as far as gender balance on boards is concerned, but also th
parasite
发表于 2025-3-27 09:54:06
Xiaoqiang Tang,Zhufeng Shao,Rui Yaoedited volume. All of these countries have introduced some sort of quota regulations in the period 2003–2015. Yet we also acknowledge that although quotas have been introduced in the eight countries, we see great variations in the design and regulations of the laws.
称赞
发表于 2025-3-27 15:01:42
Xiaoqiang Tang,Zhufeng Shao,Rui Yao quota legislation. The results now, in 2017, four years after the implementation of the legislation, seem to point to changes on several fronts. The Icelandic experience of the gender quota so far has revealed that mandatory regulation is a key to the successful increase of female representation ar
ostensible
发表于 2025-3-27 18:35:12
http://reply.papertrans.cn/83/8279/827862/827862_36.png
OGLE
发表于 2025-3-28 00:36:59
http://reply.papertrans.cn/83/8279/827862/827862_37.png
LASH
发表于 2025-3-28 05:47:24
Stiffness Analysis of the Long-Span Cable-Driven Parallel Robot,-span CDPR. Finally, the experimental results proves the effectiveness of the proposed stiffness analysis method of the long-span CDPR based on the scale model experiments considering the stiffness similarity.
Modicum
发表于 2025-3-28 09:40:00
http://reply.papertrans.cn/83/8279/827862/827862_39.png
失望昨天
发表于 2025-3-28 11:00:14
Inertia Matching of Parallel Robots,sideration of mechanical vibration frequency, acceleration and deceleration capacities and dynamic performance of the limb of the Stewart mechanism. The ratio of the equivalent inertia to motor inertia is best to be ensured within the range of 1:1–2:1.