maculated
发表于 2025-3-23 11:15:24
http://reply.papertrans.cn/83/8265/826415/826415_11.png
船员
发表于 2025-3-23 14:45:03
Reliability of Randomly Excited Hysteretic Structures978-3-642-82863-8Series ISSN 0176-5035
projectile
发表于 2025-3-23 18:44:51
http://reply.papertrans.cn/83/8265/826415/826415_13.png
较早
发表于 2025-3-23 23:50:20
Conclusions and Recommendations,rated by extensive Monte Carlo simulation. Finally, an effective method to estimate the reliability of a system having several prescribed moments has been examined. In the absence of an analytical solution, these results are the most accurate reported to date.
choleretic
发表于 2025-3-24 04:57:26
Introduction,el as well as for uncertainties in both the static and dynamic loadings to be considered and therefore give a better measure of the reliability of a system. Widespread application of probabilistic methods can be found in disciplines ranging from civil, mechanical and electrical engineering to biology, economics and political science.
MOCK
发表于 2025-3-24 10:12:03
Conference proceedings 1986engineering tool. No longer do engineers naively believe that all problems can be analyzed with deterministic methods; but rather, it has been recognized that, due to unc- tainties in the model and the excitation, it may only be possible to describe the state of a system in terms of some random meas
新鲜
发表于 2025-3-24 11:21:51
http://reply.papertrans.cn/83/8265/826415/826415_17.png
晚来的提名
发表于 2025-3-24 17:42:46
Estimating Oscillator Reliabilty Using Ordinary Moments,the distribution is prescribed is relatively simple and has been presented in Chapter IV. In this chapter, a technique reported by . which consists of maximizing the entropy of the system while satisfying moment constraints is employed to determine an approximate distribution.
Vasoconstrictor
发表于 2025-3-24 22:17:45
http://reply.papertrans.cn/83/8265/826415/826415_19.png
Introvert
发表于 2025-3-25 02:55:21
Problem Definition and Formulation,ic applications is the modified Bouc model . The original model was modified by . in order that the smoothness of the transition between the pre-yield and post-yield regions of the force-deflection curve could be controlled. The constitutive relation for the modified Bouc hysteresis model