碎石
发表于 2025-3-30 10:33:42
http://reply.papertrans.cn/83/8250/824956/824956_51.png
丑恶
发表于 2025-3-30 12:42:06
http://reply.papertrans.cn/83/8250/824956/824956_52.png
Chauvinistic
发表于 2025-3-30 16:46:10
http://reply.papertrans.cn/83/8250/824956/824956_53.png
Enervate
发表于 2025-3-30 21:37:36
J. Boldt,H. Hammermann,G. Hempelmannd ring laser gyros, have been under serious development for at least 15 years. More recently, passive approaches using ring resonators or multi turn fiber interferometers have also demonstrated much pro~ise. The only previous conference devoted exclusively to optical rotation sensors, held in 1978 i
Parallel
发表于 2025-3-31 03:50:46
http://reply.papertrans.cn/83/8250/824956/824956_55.png
思想灵活
发表于 2025-3-31 06:06:29
B. Landaueraft depend critically on accurate inertial rotation sensors. The allowable errors in rotation sensor performance depend on the particular application. Typical requirements for aircraft navigation lie between 0.01 and 0.001 degree/hour. In terms of earth rotation rate Ω. = 15 degrees/hour this become
Hallmark
发表于 2025-3-31 13:06:58
E. Breuckingaft depend critically on accurate inertial rotation sensors. The allowable errors in rotation sensor performance depend on the particular application. Typical requirements for aircraft navigation lie between 0.01 and 0.001 degree/hour. In terms of earth rotation rate Ω. = 15 degrees/hour this become
隐藏
发表于 2025-3-31 16:13:48
http://reply.papertrans.cn/83/8250/824956/824956_58.png
小母马
发表于 2025-3-31 20:47:46
G. Kreienbühltion time.Connects both fields of networking and design & si.Next generation optical communication systems will have to transport a significantly increased data volume at a reduced cost per transmitted bit. To achieve these ambitious goals optimum design is crucial in combination with dynamic adapta
Panacea
发表于 2025-4-1 00:29:16
ation algorithm is presented. This algorithm allows finding the optimum system parameters in a large parameter space with a highly reduced number of numerical simulations. Afterwards the parallelization of numerical simulations based on the split-step Fourier method is discussed. It is shown that by